Search results

ok... got it :-) http://www.hikvisioneurope.com/portal/portal/Product%20Firmware/Front-ends/01--IPC/Fisheye%28DS-2CD63XXF-I%28S%29%28V%29%29/Baseline%20Firmware_Fisheye_En_V5.3.5%20151209%28Released%29/Notice.txt "If you need to update from 5.0.9 to 5.3.5, you need to update...

Hi, i have a fisheye DS-2CD6362F-I with serial I20150728CCWR532848375 and FW 5.0.9, build 141009. Pretty much the version as avail on the Hik Download-Portal: DOWNLOAD PORTALdated 30.05.2016. When trying to upgrade to any of the higher FWs, i get an Upgrade failed! - Error. This is the same...

... ordered as darkfighter (ds-2cd4a26f-iws, 8-32mm)

Ordered here last week: Items in jtwholesaler shop on eBay. cam did not arrive yet, cannot rate the dealer.

i cannot confirm personally, but see DS-2CD4A26FWD-IZ with Onboard LPR/ANPR(License Plate Recognition) . however ive just ordered an european 4A26 with LPR-FW to be shure...

Dealers only? DOWNLOAD PORTAL

Hi Bick, Just x-checked. I am unable to reproduce this behaviour.

Hi, i'd like to push up this thread, as the question of the TS was not answered. Obviously, there is a ANPR/LPR-Firmware, Version 5.4.3/161207, available on DOWNLOAD PORTAL (uploaded the fw and its readme for future reference) Has anybody flashed its cam, formerly without...

Hi Bick, i have several 8223 in use, latest FW should be 5.4.71, dated 09.03.17. maybe a first starting point. however, i do not have these kind of weirdness. what are the other settings concerning the picture? best regards Carsten

Hi, worked for DS-2DF7286-AEL on FW 5.3.0. Thanks! best regards Carsten

Hi, i think the problems are solved now. AS expected, there is a kind of micro-fuse soldered just next to the power-connector for the external power on the top-board, slow, 5A. This one was faulty, however, after fixing this i had no 24AC supply available. Yesterday i got my previously ordered...

what ive done so far: With the bootloader still alive ive gone through firmware from 5.1.5 up to 5.4.0 but without success - the cam was immediately rebooting without any movement. after flashing it with the "original" 5.3.0 i got it with, i had the cam in the state where it was, wen i got it...

Hi Alastair, yes, it has, 3 wires, labeled AC24V on red and black wire and kind of "ground" on third yellow wire. i am unshure if it would be sufficient to hook up a 24v AC supply between the two AC24V-labelled wires or to have 24V AC connected 2 times between "ground" and the 24V AC wire. any...

hmmm. Things are gettin weird now. Thougt i might try an upgrade to the latest firmware, 5.3.10. Did it with tftp-util from the 530 to 525 downgrader. all went well (obvisouly), but there was no "update successful"-message on the tftpd-log, only transmit complete. however, the cam will not do...

SOLVED: DS-2DF7286-AEL always rebooting during StartUp / Tilt-Check Hi, ive got a 2DF7286, FW 5.3.0, build 150410. Serial DS-2DF7286-AEL20150205CCWR503784xxxx. Got it offered as used. Was able to regain access to the main password (thank you!), to change IP and so on. But unfortunetely the...