Search results

Thanks, when I get some time, I'll give it a try.

I have it configured to use generic ONVIF, which has been working for years. I tried changing to Dahua with no luck either.

When I updated from 64 bit Blueiris v. 5.5.9.2 to v. 5.5.9.3, I lost PTZ function on my Dahua SD49225H-HN camera. Rolling back to 5.5.9.2 restored operation. Has anyone else had a similar experience? Running on Windows 10, 64 bit.

I figured it out. We have Teamviewer running on that PC and it uses port 80 which caused the conflict. I switched BI to a different port and all is well. I don't know why we didn't have a problem with the BI app though.

I can access this system fine with the BI app on my phone, both locally and remotely, but trying to login with a browser using UI3 fails with " You don't have authorization to view this page. HTTP ERROR 403" It brings up the login page, but won't let me login. I am using the same user name and...

A 5 foot distance for the 12V should not be a problem. The 120V supply is not a problem either as there is very little current being drawn and it is running a switching power supply, in fact you could probably run it with hundreds of feet of extension cord. As cheap as power supplies are, I...

Even though your 12V power supply seems to be rated for enough current, I still suspect a power issue. The reason I say this is you say it quits when you touch any controls. When you do pan, tilt or zoom there are motors that are activated. Motors have quite high inrush current and if there is a...

For what it's worth, this is my camera configuration that is working fine; 2.623.0000000.7.R.R4.2510.9A.NR, Build Date: 2018-11-24 WEB Version3.2.1.662493 ONVIF Version16.12(V2.4.3.580229) PTZ Version3.02.93.RHNZ_170518_22722 S/N4M01717PAJ41872 Safe Baseline VersionV1.3 How are your camera and...

I have one of these that has been running since Jan 2019 without a single hiccup. I run mine from a dedicated 12V supply. My reasoning is that with the pan & tilt motors and high power IR LEDs, I wanted to be sure it had enough power.

So the Pixel 3 beats both dedicated cameras. Doesn't say much for either of them.

Absolutely! The old ways are dead or dieing. Maybe something like AAC in MP4?

You're right about the latest Chrome. Back when I first set up the cameras you could still enable NPAPI, but that is now gone. The thing I wish there was an answer for is the lousy IR range. I believe the IR is not aimed the same place the lens is, as it looks quite bright at the very bottom of...

I have had this camera running for a while and it has not dropped connection to BI, rebooted or failed which is nice. I am, however, a little underwhelmed for the price. It replaced an infamous Huisun which failed, but while it was working it did a better job than this Dahua, and being much...

Thanks for your reply. I really like this camera's specs and I guess I''l just roll the dice and take my chances. Can't be any worse than Huisun :)

When you buy a camera from Andy (or anyone) at Aliexpress is there really any warranty, as it costs a fortune to send anything to China. If it breaks will Dahua USA warranty or are you just SOL?

Thanks, I'll check them out.

I am looking for a fairly inexpensive wireless IP outdoor bullet camera that supports AP mode so I don't need any router, just a smart phone. I have found several cheap Chinese ones, but they use the Yoosee APP which as of this year is spyware, so need one that can be configured via a web...

25 C is hot? Try 38 C

I only have one camera. I got a replacement board last year, but thought it had a problem, turned out to be a bad plug connector. I just tried both boards in the camera and they both worked.

Thanks Alastair for your help. You are the man, my PTZ lives again. Something I noticed is Huisun changed their PTZ protocol from the V1.1 to V1.3 boards I have. In BlueIris the V1.1 works with Hikvision/Abus and up/down reversed. The V1.3 uses ONVIF (OXML). I made a better heat sink for the...

@alastairstevenson Thanks for the offer. PM me your address and I'll see what post would cost and if not too pricy, I'll send them to you.

Could you share the contact info? I have one of these that has the exact V1.1 board and would like to try a v1.4 like yours and see if it can be resurrected.

I wonder if the heat sink on the processor is a problem. I had one that failed after a few months and upon taking it apart I was disappointed in the poor thermal contact that little pink rubber attempts to make with the housing. I am curious if your zoom works OK? I replaced mine with a newer...

@alastairstevenson Thank you for your help. I am new to working on IP cameras, so I probably know just enough to be considered a menace to society:)

@alastairstevenson Would you be so kind as to PM me the root PW. I have a bricked Huisun X10 V2 I am going to try a TTL interface to. Also are these 5V TTL level 115,200 baud 8 bit no parity?

I have a Huisun HS-SCB415ip-V10 that seems to have died. It is powered with 12V directly and not POE. It worked great for 8 months, then when the weather turned cold, it just died, no start up initialization and can't ping it. I have seen where these seem to be high failure units, so does any...

@alastairstevenson I have one of these fine Huisun cameras, model HS-SCB415iP-V10 which has worked great for about 8 months. When the weather started getting cold it quit, I cycled the power and it went through startup and worked for a few days and quit again, but this time it is dead the only...