Search results

Ok, the content in the second photo resolved the issue I was experiencing. Turned the brightness to 0 and LED is off at night

I’m not sure I fully understand what you are referring to… are you referring to if motion is activated, trigger alarm [output], and this trigger would be LED on at night?

Hello, I have scoured the web and this site for an answer but was unable to find a working solution for the G1 camera. I am looking to TURN OFF the LED light which seems to shine all night. Cannot find the LED OFF part in Day/night switch where I’m seeing in other videos. The settings there seem...

The beep which the doorbell makes. Client managed to disable the beep in the app somewhere but don’t remember how

You know what, you just gave me an idea… I’ll put the Cisco switch BEFORE the ASUS router and have the cameras on the 10.1 network from the switch and the ASUS plugged into the switch, isolating the ASUS and it’s devices to a 172.16 network This should resolve the double NAT! Ill keep you posted

This only Cisco device on the network is a switch, on the 172.16 side, after the ASUS router, which is behaving as a managed L3 switch, with no VLANS or tagging or DHCP servers on any of the ports. All ports are basically trunks

Request to separate LAN’s was the request of property owner. And for obvious reasons because building 1 is residential, building 2 and 3 are on the commercial side. the 172 side has 12 devices with the potential to 150 devices from the AP’s (when events are hosted)

Hello all I am having trouble accessing cameras from a different building on the property that has a separate Network. Cameras are behind that network. They used to be accessible when the whole property was on the same LAN but for obvious reasons, they wanted completely separate networks under...

Did you ever figure this out? Have 2 clients with exact same setup (8ch NVR, 1 doorbell, stand-alone and configured via wifi to NVR, and 7 hard wired cameras) and just one client with this issue

“So if your computer get lost/stolen/hacked ... someone else has access to your customers? Great! So if something happens there they will always blame you? Great!” Too bad I always have my laptop with me, strong password protection, and have never had a laptop stolen, nor do I put myself in...

Let’s start from the bottom up… “Seems that myself and they cannot access the cameras” these are business locations not residential properties. They want me to be able to access the system in case there may be some unforeseen issue or pull video (which is charge them for) my account creds are...

well yea, that’s not good for me… at the moment… I’m out of town (for AT LEAST another 2 weeks) and one of my customers is PISSED, even though it’s not my fault

I use GHI DDNS for a couple of my clients and it seems that myself and they cannot access their cameras and I cannot access the ghiddns com site. Is anyone else experiencing this issue??

I am able to access the video feed using the villa station screen. Hopefully I could find some type of workaround with this EDIT: The ONLY think i am able to modify is DHCP settings and the Hik-Connect Server address. Other than that, nothing else works. Note: there is a debug port. Maybe I...

No physical reset button. Even opened it to see if there was somewhere in there in internals but no

I understand that this may be in the wrong listing, but i really dont know where to post for a password reset. Purchased a DS-KV6113-WPE1 on eBay because I could not find one elsewhere in the US. Said 100% Authentic and Upgradeable. But waiting for the seller to respond for a password reset may...

Hello all, I am fairly proficient configuring the nvr and the cameras as well as configuring the schedule/motion/line crossing settings, but connecting the Doorbell button press and push notification to phone just confuses me. I can get the video feed to work no problem, but when button is...

So what are my TFTP options to load firmware which is over a 32MB file size? Do i have to push through the 4 pins on the motherboard? Is there another tool which could push a larger firmware via the ethernet cable? Say, 42MB?

Yes, using Hikvision Updater and yes, tried the traditional firmware upload methods as well. May search for a smaller/older firmware or just use Putty. That 32mb file size explains a lot. any other tips?

Hello, I have fortunately not bricked my rebranded Hikvision NVR... But, the 3rd party firmware is lacking some features and is few and far between when it comes to pushing out new firmware. Would like to upload Hikvision firmware. Found the Hikvision firmware (I think) is for this rebranded...

I’ve probably spent a good 40 hours testing different solutions and this one solution works the best. It really comes down to the firmware, using a vpn, and using the local IP address. It’s that simple. So I’ve noticed that the newest (rebranded Hikvision NVR) firmware will not display a live...

Firstly, you can resolve this by using iVMS, manually adding in your NVR using the locations public IP or a DDNS followed by port 8000 and the user credentials. But. Even though that solves the overall issue, It still doesn’t answer your questions so here’s a list of potential reasons...

What NVR? Cameras? Firmware? We need details. Many symptoms are different with different equipment

Ive been trying to search for modifying firmware but i keep hitting road blocks.... My clients NVR Web Browser Live View used to work on their Macs (most of my clients oddly have a mac, as do i) until recent Firmware updates. I downgraded my firmware on my test NVR, the sub stream and playback...

Im subbing to this thread. Most of my clients use Macs and they prefer to view their system via a web browser. Used to work until recent firmware updates, therefore, I may need to modify the firmware. Would be nice to use my company logo as well

OK, I was able to narrow down the issue to the firmware. On previous firmwares, I was able to view my cameras on Web Page just fine. Upgraded, the play button is unresponsive. Downgraded to an old firmware and it works, but only sub stream and it seems buggy. Clients new NVR works on web page...

Doesn't work on any browser... funny how the sub stream works on ALL cameras, but the moment you bring one up into full screen, its just gray and does not work. Its all good. Everything is stable using SecuritySpy... Only thing is theres not free option for playback. Any better 3rd party VMS...

Well thanks for trying to help. Do you know if reaching out to Hikvision would help any? has anyone here had success with that?

yes, Safari and other browser don’t do plugin support anymore either... although, Doesn’t hurt try your link and follow up EDIT: Downloaded plugin from link provided, installed, and opened safari. NVR still shows install plugin tab (and does nothing when clicked) and same issues persist. Can...

Hello all, I have tried everything to help my clients view their video feed via the web page. It actually works when viewing all cameras at once on sub stream. but the moment they select just one camera and "blow it up" full screen, sub or main, all is seen is a gray screen and no video...