Search results

I have a DS-KV6113-WPE1(B) were the button is now blinking after a failed upgrade. It is not visible on SADP and I have also copied the digicap file directly to the SDCARD but I am still unable to complete the upgrade or see the doorbell on the network. Any help would be appreciated or is it...

Hi Could anyone help me get the correct firmware for the Dahua NVR listed below:- Sticker on the base of the NVR says NVR4416-16P-4TB in the system it shows the details below type R19939 Record channel 16 Alarm in 16...

Hi Everyone I have a Hikvision DVR 16 channel DS-7216HQHI-K2 running a few IP cameras that was working fine i.e the IP cameras were recording on the DVR. As, I added another IP camera ALL my recording has stopped on the remaining IP cameras, even though I can view ALL the IP cameras. I don't...

Hi Guys I have a Hikvision iDS-7208HUH-K1 DVR that will not load up. When powered on the LAN lED light flashes and that is it, nothing else. Any help or pointers would be appreciated....

id-7208HUHI-K1/4S(B) updated with DVR-K8A3_EUROPE-ML_STD_V4.26.131_210811. Update was OK error in loading shows insmod: can't insert 'extdrv/tp2823.ko': No such file or directory *** ATTENTION!! PLEASE READ THIS NOTICE CAREFULLY ! * Don't power off or anything that interrupt it ! * The...

I have a DVR DS-7216hqhi-k2 not booting I have disconnected the HDD and coonected a serial TTL cable to try and reflash in case its a firmware issue. On boot it shows System Startup and nothing else, I can't enter any commands as it remains on this all the time. No output to the HDMI / VGA or...

I have been running IVMS lite for over a year on my windows 10 laptop without any major issues, but now it will not open and leaves the process running. What i have tried so far unistalled IVMS repaired IVMS re-installed IVMS tried different versions cleaned my registry of ALL IVMS after...

Hi I have a Hikvision DVR that appeared to be working well and recording ALL cameras, until an event occurred and there was NO recording for that specific camera. I checked ALL settings for camera storage etc and everything looked good, so decided to reset the DVR and re-configure. The...

Hi Everyone I have 16 channel DVR DS-7216HQHI-K2, which is running well with 7 normal BNC cameras and 5 IP (Wifi & Fixed LAN) cameras. Firmware is up to date on V4.30.120 build 200630 I have connected to the video output so that I can send the image to a second monitor and I am using the channel...

I have Hikvision PTZ Speed dome DS-2AE5223TI-A, and I have set 14 presets, when I set it on a patrol it goes to the 1st and subsequent presets, however, it stays on the last preset and does not return to the first preset

I have a Dahua IP camera sd65f233xa-hnr and I am having issues with the Tour. I have 8 presets in a tour that I can get to individually. When I add the presets to a tour in SmartPSS, it goes to the first preset and stays there and dosen't move to the subsequent presets. The first preset...

Hi I have a Dahua IP camera sd65f233xa-hnr and the image is partially focussed. The focus is only within a 5cm square, beyond that the image is out of focus. I have clicked the regional focus button but the focus remains only on part of the image.

Hi I have a 16ch Hikvision DVR DS-7216HQHI-K2 and I cannot add more than TWO IP cameras, even if I reduce the number of analog camers from 16 to 2. I have the latest software running V4.30.120 build 200630, according to the specs, I should be able to run 8 IP Cameras +16 Analog Spec is below...

I have a 16 channel DVR that has is not showing user name for login and I presume that it has bad firmware flashed. From the information I have found I can reflash it using a USB TTL cable, however the board has two JST ZH headers and I don't know which one is the correct one to connect the...