Search results

Indeed, got it working by using Serial cable and TFTP...

I have a DS-KV6113-WPE1(B) were the button is now blinking after a failed upgrade. It is not visible on SADP and I have also copied the digicap file directly to the SDCARD but I am still unable to complete the upgrade or see the doorbell on the network. Any help would be appreciated or is it...

No problem if I brick it, just wanted to know if there was any later firmware for that model

Thanks, I tried that and it worked, is there any further update or was that EOL

Hi Could anyone help me get the correct firmware for the Dahua NVR listed below:- Sticker on the base of the NVR says NVR4416-16P-4TB in the system it shows the details below type R19939 Record channel 16 Alarm in 16...

For anyone who wants an update, I managed to resolve by deleting and readding the motion and events configuration for each IP camera. This fixed the issue of recording event and Motion detection for each camera

I removed the IP camera, I reverted back to my original camera configuration and the existing IP cameras are still not recording anything. It seems as adding the new IP camera has affected the configuration, in such a way that I may have to reset and start again. Unless anyone else has any...

For the camera that I added, I can't drop the resolution to 2MP, it gives me a parameter error on the DVR. The remaining analogue cameras are recording fine, its just the IP cameras that are not recording. Any other suggestions...

Hi Everyone I have a Hikvision DVR 16 channel DS-7216HQHI-K2 running a few IP cameras that was working fine i.e the IP cameras were recording on the DVR. As, I added another IP camera ALL my recording has stopped on the remaining IP cameras, even though I can view ALL the IP cameras. I don't...

Power supply appears to be OK, however, I will try another one just in case..

Got my lights mixed up. The Power and HDD light are constantly on, however nothing on the display

Hi Guys I have a Hikvision iDS-7208HUH-K1 DVR that will not load up. When powered on the LAN lED light flashes and that is it, nothing else. Any help or pointers would be appreciated....

Hi The IP cameras, have never shown on channel Zero, ONLY BNC. I have compared the configuration to another DVR which is showing the IP cameras. This means that this must be a firmware issue on this particular model. Although I have also tried multiple different firmware. Changing the view to...

id-7208HUHI-K1/4S(B) updated with DVR-K8A3_EUROPE-ML_STD_V4.26.131_210811. Update was OK error in loading shows insmod: can't insert 'extdrv/tp2823.ko': No such file or directory *** ATTENTION!! PLEASE READ THIS NOTICE CAREFULLY ! * Don't power off or anything that interrupt it ! * The...

Thanks, will give it a try

Hi ItuneDVR Apprciate any pointers or instructions, please...

I have a DVR DS-7216hqhi-k2 not booting I have disconnected the HDD and coonected a serial TTL cable to try and reflash in case its a firmware issue. On boot it shows System Startup and nothing else, I can't enter any commands as it remains on this all the time. No output to the HDMI / VGA or...

For anyone facing the same issue, to get IVMS working again, I did the following SFC / SCANNOW did not report any errors, but problem persisted DISM to try and cleanimage and repair any corrupt files found - This would not compete and kept failing with error codes. I tried different...

I have been running IVMS lite for over a year on my windows 10 laptop without any major issues, but now it will not open and leaves the process running. What i have tried so far unistalled IVMS repaired IVMS re-installed IVMS tried different versions cleaned my registry of ALL IVMS after...

Hi I have a Hikvision DVR that appeared to be working well and recording ALL cameras, until an event occurred and there was NO recording for that specific camera. I checked ALL settings for camera storage etc and everything looked good, so decided to reset the DVR and re-configure. The...

Downgraded and tried all firmware versions from V3 to V4.25 and all failed to show IP cameras on Channel Zero....:(

The latest FW at HK europe appears to be different. I am wondering whether to downgrade, because mine is V4.30.120 build 200630 and on the site its V4.25.001_201107, version is lower but date of firmware is newer. What do you think, should I try it ? File/Direcory File Size Date .. -...

Check the Live view- View section, Channel Zero display squares. check if the DIGITAL ( ip camera 's ) are selected. ( settings, select expert modus on top bottom left ) general, live view, view... output interface, channel zero ) Doesn't show my ip cameras only shows BNC cameras in Aux CVBS...

Hi Everyone I have 16 channel DVR DS-7216HQHI-K2, which is running well with 7 normal BNC cameras and 5 IP (Wifi & Fixed LAN) cameras. Firmware is up to date on V4.30.120 build 200630 I have connected to the video output so that I can send the image to a second monitor and I am using the channel...

Hi Genelit That did the job.... Thanks..

I have Hikvision PTZ Speed dome DS-2AE5223TI-A, and I have set 14 presets, when I set it on a patrol it goes to the 1st and subsequent presets, however, it stays on the last preset and does not return to the first preset

I have a Dahua IP camera sd65f233xa-hnr and I am having issues with the Tour. I have 8 presets in a tour that I can get to individually. When I add the presets to a tour in SmartPSS, it goes to the first preset and stays there and dosen't move to the subsequent presets. The first preset...

OK, so I will only use the web access to make changes. However, I am still having issues with the Tour. I have 8 presets in a tour that ALL work individually. When I start the tour it goes to the first preset and stays there and dosen't move to the subsequent presets. The first preset tiltle...

Thanks, that was what I expected. On the presets that I want the IVS to kick in, I have set the time for at least 15 seconds. I have done the presets but get the error shown in the attached screenshot. Why is there a difference between the SmartPSS settings and the web, eg some presets are shown...

Thanks AJWitt, i Managed to sort it out by disabling EIS Another question, if I put the camera on a tour and have 10 presets within it, but only two enabled for smart tracking, will these activate when the tour reaches those presets? If the tracking activates, then will the tracking override the...