Search results

  1. G

    Replacement Camera Setup

    I'm game.I'd also like to get it off of 192.168.1.108 like Flintstone61 recommended. My original camera started acting up maybe 6 months ago.It would go offline from time to time with a failure to find the host message.
  2. G

    Replacement Camera Setup

    Okay,I appreciate all your help.I'll try to reset it a few more times and might look into a newer nvr.
  3. G

    Replacement Camera Setup

    I did that a few steps back,"Last thing I know to do is disconnect it. Delete any leftover entries top and bottom, plug back in and do the physical hard reset . Often when it moves to bottom by itself it will show red initially, but give it a few minutes and hit refresh and it turns green. "
  4. G

    Replacement Camera Setup

    Sounds good,can you walk me thru the reset?Is that a reset on the nvr board?
  5. G

    Replacement Camera Setup

    Looks like the bottom half TCP Port changed from 37777 back to 1,althought the upper half says the port is 37777. On the nvr gui the top half reads port 1.I clicked on add and it sent another camera with port 37777. Still not seeing the camera image.
  6. G

    Replacement Camera Setup

    I'm using a different IE broswer via Edge.I was previously using a workaround IE.vbs script someone had mentioned here.
  7. G

    Replacement Camera Setup

    I just changed it.
  8. G

    Replacement Camera Setup

    Could this be a problem?The other 3 working cameras have Default Gateway 10.1.1.1.
  9. G

    Replacement Camera Setup

    I have rebooted nvr. cam2.PNG is from the bottom half using the pencil button cam1a.PNG is using the top half,problem camera checked and "modify IP"button pushed. You mentioned,"The top pane (Modify IP) is just discovery, you can’t/shouldn’t edit anything there".I have compared the working cams...
  10. G

    Replacement Camera Setup

    It looks like I'm already on Port 37777 on the top half(cam1.PNG)Do you mean to change the lower half port from 1 to 37777? P2P was enabled,I have it disabled now.
  11. G

    Replacement Camera Setup

    My "Modify IP"looks like cam2.png.When I try to change the to change the User/Password to that of the NVR,it sends a default gateway fault(web1.png) I have logs from Sept 5 thru today attached.
  12. G

    Replacement Camera Setup

    Okay deleted it from the web service gui then reset the camera reset button,waited 5 min.and it didn't appear.Pressed refresh and its back on the bottom pane with the red x under status.
  13. G

    Replacement Camera Setup

    I tried this and nothing changed.The default gateway I changed to the sam as a working camera reverted back to where it was to begin with.
  14. G

    Replacement Camera Setup

    This gives me a different message.I tryed to change the default gateway to the same as a working camera with no success.
  15. G

    Replacement Camera Setup

    I did enter the NVR password,pressed connect,then no response.Then pressed OK.Received the message "Successfully Operated".No changes after that.
  16. G

    Replacement Camera Setup

    Correct,I am on my LAN via Verizon router with added Linksys ethernet hub.I added a screenshot from thr NVR's gui.
  17. G

    Replacement Camera Setup

    Trying the Config Tool,it looks like it only sees the NVR.I'm not sure where to go from there?
  18. G

    Replacement Camera Setup

    I'm trying to setup a replacement IPC-HDW5231RP-Z that recently went offline.I order an IPC-T5442-ZE from Andy and not able to connect to the camera.The error code on my camera monitor attached to dvr reads,"10.1.1.65 conf.LoginErrorNo-18" I am using Internet Explorer to access the Dahua Web...
  19. G

    Dahua Starlight Varifocal Turret (IPC-HDW5231R-Z)

    I was told 500 pcs next shipment
  20. G

    IPC-HDW5231R-Z autofocus stopped working

    I think I have this solved.I used my laptop and using the "Hitting cameras web pages with a laptop in an NVR with POE" thread,went to the cameras focus tab and hit autofocus.It looks like its back to normal for now.
  21. G

    IPC-HDW5231R-Z autofocus stopped working

    Last month I hooked up my new camera and NVR(NVR5216-16P-4KS2) to dry run the system.It all worked great!Yesterday I ram some cable in the attic and hooked the system back up again.When I restarted the nvr,the camera was sending an "account locked password not recognized"message.I did some...
  22. G

    Dahua Starlight Varifocal Turret (IPC-HDW5231R-Z)

    This is the one @nayr recommended in an earlier post,Samsung 128GB EVO+ microSDHC Card with Adapter, MB-MC128DA/AM
  23. G

    Failed Aliexpress Transaction?

    Frogg, Thanks for the update.Nice deal with the NVR. I ordered the NVR5216-16P-4KS2,it sounds like that's what you ordered too,but was sent the 32 channel model.I haven't heard anything since last Thursday. I may send them another text tomorrow.On the other hand,I ordered a Dahua Starlight...
  24. G

    Brick Ranch House

    You're right.My wife doesn't know it yet ,but that wind chime is history.I agree on installing another cam later. Just placed a order with Andy for a Starlight.
  25. G

    Failed Aliexpress Transaction?

    Glad to hear it.My AliExpress seller informed me last night that that they located my funds but the the NVR I wanted isn't in stock and they expect a new shipment soon. I'm okay with that,it was a relief that they located my money.
  26. G

    Brick Ranch House

    No I haven't.I'll give it some thought.Thanks
  27. G

    Brick Ranch House

    Just took a measurement and its 7ft 9in from the soffit to the porch.It looks like I'll go with the Starlight. I may be able to add a junction box or something to the base of the camera to lower it some.I'm thinking maybe trying a temporary location near the middle window and aimed towards the...
  28. G

    Brick Ranch House

    Thanks for the advice.I actually have a Bosch hammer drill and bits on my service van.I may go that route,but trying to avoid it now.
  29. G

    Brick Ranch House

    Good point,this is what I'm inclined to do.
  30. G

    Brick Ranch House

    Good point.I looked into getting some sort of extension bracket to lower a Starlight,but felt that would hurt the homes curb appeal,not to mention allowing someone to reach up and pull it off the soffit.
Top Bottom