Search results
-
B
two Hikvision cameras not being seen or recorded by Hikvision NVR
Yes, the IP matches the Camera Configuration of the NVR. It's been working for over 2 years now. I did change the IP to another IP that is in the range of the NVR configuration; the NVR saw it, it actually looked like it was going to work, it showed the 'serial#" of the camera at first but once... -
B
two Hikvision cameras not being seen or recorded by Hikvision NVR
We have had this system for a couple of years now. Two DS-2CD4324FWD-1ZHS8 cameras have stopped recording because they're not being seen by our Hikvision DS-9632NI-ST NVR. We're using a Hikvision POE switch to power the cameras, if I connect directly to the switch I can use a browser to... -
B
Hikvision DS-2CD4324FWD-IZHS8 firmware update 5.3.0 out of focus
whoslooking, Thank for the suggestion to update the firmware via tftp, I finally brought in my laptop to be able to do that update. It worked, kinda of! The instructions I found mentioned 'waiting' until the server said update completed, I didn't get that message. But after opening the SADP... -
B
help, suggestions and recommendations for a camera to replace 2 possibly 4 HIK DS-2CD4324FWD-IZHS8
Here is a snapshot from camera #4 before the firmware update. As you can see reading license plates is pretty much impossible at 190ft. I have a closer view of the same car and it's still unreadable. -
B
help, suggestions and recommendations for a camera to replace 2 possibly 4 HIK DS-2CD4324FWD-IZHS8
Two years ago we had a security camera system installed; a complete HIK Vision system, NVR - DS-9632NI-ST with 30 assorted HIK cameras. The HIK DS-2CD4324FWD-IZHS8 cameras are pointed and recording our entrance / exit driveways. We are a car dealership and if need be we need to be able to... -
B
Hikvision DS-2CD4324FWD-IZHS8 firmware update 5.3.0 out of focus
Thank you for your input; my only problem is my camera is POE only, I don't have an external PS and the external PS plug has been cut off. Not sure if they come that way or if the installer cut it off. I don't have a separate POE switch I can do this with. If I run this on my current... -
B
Looking for rack mount ears for Hikvision 7608 NVR
This is kind of late but if you can't find ears, why not just install a shelf and set the NVR on that? We have two racks (1 two post, 1 four post) with some older equipment that who knows where the ears are so we just installed shelves and set the equipment on them. Just a suggestion!- bfordz
- Post #24
- Forum: NVR's, DVR's & Computers
-
B
Hikvision DS-2CD4324FWD-IZHS8 firmware update 5.3.0 out of focus
whoslooking, Thank you for that info., yeah, taking it down, not going to be my favorite thing but if I can't get it to focus better I'll have to re-aim it anyway. So, I guess I'm getting a lift for this project. Also, if I can't get it to reconnect to our NVR, I'll be looking to replace this... -
B
Hikvision DS-2CD4324FWD-IZHS8 firmware update 5.3.0 out of focus
whoslooking, Thank you for the reply, I defaulted the camera, didn't change my problem although to get it to focus I have to change my zoom settings / field of view(?). If I keep the original zoom position I can't focus the camera, if I zoom in until it focuses I'll have to re-aim my camera... -
B
Hikvision DS-2CD4324FWD-IZHS8 firmware update 5.3.0 out of focus
We have 5 of the DS-2CD4324FWD-IZHS8 cameras, I upgraded the firmware on 2 of them from 5.2.0 to 5.3.0 without any problems. When I upgraded the 3rd camera, all seemed to go well but now the picture / view is out of focus and I can't get it back into focus via the web console. Am I going to... -
B
Hikvision NVR DS-9632NI-ST email setup not working
alastairstevenson, thank you for that updated info. Do you know if I can update my firmware from v3.1.3 straight to the latest version or do I have to do it in ascending order of release? I'm seeing v3.4.4 as the latest release for mine/US. -
B
Hikvision NVR DS-9632NI-ST email setup not working
Update: I tried to switch over to gmail; change my settings to the gmail smtp settings and got the same results. As soon as I click "test", I get the popup message "Failed to send test email" AND I'm seeing the NVR (nvr ip address) traffic (email communication) leave our firewall. So it appears... -
B
Hikvision NVR DS-9632NI-ST email setup not working
I'm trying to setup the email notifications in my NVR for Video Loss and Video Tampering. We occasionally have cameras quit working so I'd like to know sooner than getting phone calls that the cameras are out. We have 30 cameras spread between 3 buildings; separate Hikvision poe switches in... -
B
DS-2CD2732F-I quit working, no video / picture
I did do the factory reset and reinstalled it back outside. It's been cold(er), rain, sleet so we'll see what happens, so far so good it's been 24 hrs. -
B
DS-2CD2732F-I quit working, no video / picture
bp2008, thank you very much for that input. that's just the kind of input I like to see. with a lot of other equipment they say to update to the "latest", in this case I'll take your advise and keep what I have. -
B
DS-2CD2732F-I quit working, no video / picture
alastairstevenson, thanks for the release notes link. keyboard, appreciate the thoughts, all our outside cameras are "dome" cameras installed by a third party company. I was a little concerned about them especially the ones mounted on the side walls; snow and rain make them hard to see through... -
B
DS-2CD2732F-I quit working, no video / picture
ok, I searched and found firmware on the Hikvision US site; v5.4.0_160530 I opened the zip file but there wasn't any description as to changes or fixes etc., is there a place they have that posted before I upgrade? Or should I update the firmware? thanks brad -
B
DS-2CD2732F-I quit working, no video / picture
bp2008, thanks for your reply, I will look that up. now that this camera has been inside for a couple of hours, I had it unplugged, I plugged it in to reset it and now it's being recognized and working. :confused: If I wanted to update the firmware do you know where I would find / download the... -
B
DS-2CD2732F-I quit working, no video / picture
All of a sudden one of our DS-2cd3732f-i cameras quit working, no video. I tried to reset with a power cycle by unplugging the ethernet cable (poe) but that didn't work. (tried 30 seconds, 2 minutes, and over night) I took the camera down, used external power and our regular network (hikvision... -
B
Hikvision DS-9632NI-ST can't login at the NVR
Alastairstevenson, thanks for your reply; I've done that and then some. I don't even get a mouse cursor. I even tried plugging in a USB keyboard and hitting keys to wake it up. I have since rebooted my NVR so I've gotten in but then next time it freezes I' stuck again. I read another post...- bfordz
- Post #3
- Forum: NVR's, DVR's & Computers
-
B
Hikvision DS-9632NI-ST can't login at the NVR
When I turn on the monitor connected to the NVR it's locked at what appears to be Camera 1. It's like a screen saver but I can't get past it. How can I get past this screen to login without shutting down and rebooting? Thanks, bfordz- bfordz
- Thread
- hikvision nvr
- Replies: 3
- Forum: NVR's, DVR's & Computers
-
B
HDD make and model?
I'm still wondering why it froze up like that. I got around it via the WebApp using firefox. While I was in there I wanted to change the VGA output settings to use a different monitor; it rebooted the NVR when I saved the settings. Once it rebooted I was able to get in via the NVR, shut it... -
B
HDD make and model?
another question / problem! I went up to the NVR to shut it down to install my new HDD; my screen is stuck (frozen) on what appears CAM1 video feed. I can't get the menu to come up. How do I get the menu to show up onscreen? Moving the mouse don't work, Mouse clicks left/right don't work... -
B
HDD make and model?
I know what GB means, I'm just not used to using TB drives...I meant TB. -
B
HDD make and model?
Thanks for your input; I chose to go with the WD Purple 4GB. Since this is a business and not my personal home system. I always appreciate the "two cents" or I wouldn't ask. :) -
B
HDD make and model?
Del Boy, Thanks for the quick reply; I just thought it would keeps things simple for future reference is they were both the same. I've replaced a lot of Pc Hdd's and I personally prefer Seagates; are their NVR hdd good quality or would you suggest something else? Also, thanks for the... -
B
HDD make and model?
We recently installed a HIKVision security system; we're just finding out our 4Gb HDD isn't big enough for the amount of recording time we require. We're only getting approx. 8 days of recorded time and I need to add another HDD. Can I find out the Make / Model of the HDD without shutting it... -
B
iVMS 4200 client software
TheUberOverLord, You've been more help and better than the manufacture. -
B
iVMS 4200 client software
Thanks again UberOverLord for your advise and assistance. I had contacted HIKVision also, their first response was the usual "canned" response; 'it's a permission setting' ... here's the manual. Well as I explained in my first post, my version of the software didn't have that 'permission' AND...