Search results

  1. I

    IPC-T54IR-ZE-S zoom setting question.

    Yep. I did.
  2. I

    IPC-T54IR-ZE-S zoom setting question.

    Yeah, that is exactly what's happened to my brand new S3's from Andy. Not too worried about the zoom part since I set it and forget it, but I don't like the part that the inspect doesn't find it properly. Maybe some of the wiz kids on here will come up with something sometime. They always do...
  3. I

    IPC-T54IR-ZE-S zoom setting question.

    I tried those settings just to test, but they didn't work for me. No big deal I guess, as I will use the zoom from the Camera GUI if I need to, but I guess new cameras sometimes don't work with the old BI settings. It is maybe a safety feature as someone noted??
  4. I

    IPC-T54IR-ZE-S zoom setting question.

    I decided to try it, but turning it off doesn't do a thing on the inspection process in BI. It keeps saying Foscam and then doesn't populate the stream profiles.
  5. I

    IPC-T54IR-ZE-S zoom setting question.

    I found it. Duh. Time to go to bed. I'm too tired tonight to do anymore. Thanks.
  6. I

    IPC-T54IR-ZE-S zoom setting question.

    I thought I knew what you were talking about, but login verification located in network settings? Where do I find Network settings? I'll keep playing around, but I haven 't found it yet.
  7. I

    IPC-T54IR-ZE-S zoom setting question.

    Yes, S3. I'll try that. Thanks.
  8. I

    IPC-T54IR-ZE-S zoom setting question.

    Yeah, I manually entered it. It works, because when I check it on UI3, in properties, it shows substream 2.
  9. I

    IPC-T54IR-ZE-S zoom setting question.

    I do that to, but for these 2 new ones, it doesn't like that. My 5442 just comes up, the new ones sputter and then go blank with only default as a choice but nothing fills in the blank like you have written. Thanks again.
  10. I

    IPC-T54IR-ZE-S zoom setting question.

    Okay, understood. I turned it off, and am using the camera GUI, but I would still like to know what Make and model people use. For one of them, it won't give me a choice for Main and sub profiles. It just says default. If I want to use sub 2, I don't have that option anymore, unless I'm doing...
  11. I

    IPC-T54IR-ZE-S zoom setting question.

    I need to set my IPC-T54IR-ZE-S properly, but it won't zoom in or out for me to test and set it properly. Does anyone know what Video config it should take? Make? Model? And what PTZ setting I should use? I have tried a bunch, but non work. Thanks.
  12. I

    How many watts do you think these cameras will actually use?

    That's what I was thinking. Thanks for the reassurance.
  13. I

    How many watts do you think these cameras will actually use?

    I'm trying to figure out for a PoE switch what these cameras will actually use and what size PoE switch I should get? SD5A425XA-HNR PTZ SD5A425GA-HNR PTZ 2 - IPC-T5442T-EZ 2 - IPC-T54IR-ZE-S3 So, a total of 6 cameras plus a Nano station and EAP. Thanks.
  14. I

    PTZ controls stopped again??

    I tried the New V5 and it doesn't work, so I'll stick with the New V4 for these newer ones. But this setting doesn't work for my 2 year old PTZ. I'll have to play with it I guess. They are Andy's previous model to this newer one.
  15. I

    PTZ controls stopped again??

    I just set it to Dahua New V4 and it works.
  16. I

    PTZ controls stopped again??

    I have the PTZ5A4M from Andy, and my PTZ controls stopped working again on my BI. I know it is user error, but what should the proper setting be to get my PTZ cameras to work with PTZ? Should the PTZ/Control be set as a Dahua camera? It has ONVIF (OXML) set right now, but that is not working...
  17. I

    Is IPC-T5442T-ZE still the best bang for the buck

    Thanks. That sounds great.
  18. I

    Is IPC-T5442T-ZE still the best bang for the buck

    I did a search and found the same question asked, but it ended over a year ago. Since a year has passed, has there been any changes? Is the IPC-T5442T-ZE still the best bang for the buck?
  19. I

    DH-SD59225U-HNI PTZ control works in dahua gui but not in BI?

    My DH-SD59225U-HNI can't be controlled when I try to run the PTZ controls with BI. When I go into the camera GUI the PTZ controls work fine. What happened? Has anyone experienced that before? I'm sure I must have done something along the line, but really haven't messed with anything that I know of.
  20. I

    What do most of you do for runs over 350 feet?

    Well, I just went and talked to him and I think I have it figured out on what we can do. I'm going to be moving the switch and power to the other side of the totally enclosed building. That will put it 70' closer to the farthest away PTZ camera. I told him that was the only way we could get it...
  21. I

    What do most of you do for runs over 350 feet?

    Not at this time that I know of. It is mainly just to park the equipment in to get out of weather.
  22. I

    What do most of you do for runs over 350 feet?

    That's all dependent on how much more he wants to spend doing this. It's not like it is cheap to build this building and will take a lot to get it wired since is is not an inside finished building. It would take hundreds of feet of conduit and electrical wire, and electricians. Probably a...
  23. I

    What do most of you do for runs over 350 feet?

    Well, unless I can get power to the points I would need it, the only thing that will be able to run, will be cat6 cable. I won't know until the building is finished to know how the facility will look for sure and if he is even planning on running any type of electricity to any parts of it.
  24. I

    What do most of you do for runs over 350 feet?

    It may be that he can't run as long as he wants me to. This is in an outdoor metal building. It will be a storage facility for all of his large equipment. It is 3/4 covered. The front is open and exposed to the elements. The way it is setup it will be hard to add power to a lot of the places...
  25. I

    What do most of you do for runs over 350 feet?

    My friend wants to put a camera at the far end of his building and up at the top. The building is 20' high, and 320' from the source. The cable run will be around 360 when all things are said and done with the up and down walls etc. What would you do to make this work properly? I have run a lot...
  26. I

    Camera goes on/off on hot days.

    What is the distance of the run?
  27. I

    How do I setup motion detection on my PTZ5A4M-25X

    I've got to redo an older PTZ that I had to reset. It has been so long, that I'll have to try to remember how I did it over 2 years ago. My memory sucks. I'm sure it will be somewhat similar though.
  28. I

    How do I setup motion detection on my PTZ5A4M-25X

    Thank you so much. I hadn't found that video yet. I probably would have, but it may have been next week ;). I so do appreciate it. Have a great day.
  29. I

    How do I setup motion detection on my PTZ5A4M-25X

    Its the new gui.
  30. I

    How do I setup motion detection on my PTZ5A4M-25X

    I just got 2 new PTZ5A4M-25X , but I can't seem to figure out how to get them to detect motion and track. I will keep looking for the settings in the meantime and see what I find. Thanks.
Top Bottom