Recent content by SamM

Try the lightsys plus or Prosys Plus. I have had great success with it. https://www.riscogroup.com/products/solution/56925

Use a memory card in the slot provided on the camera, record duration is dependant on the size of the card. It records locally instead of a NVR.

try this previous thread https://ipcamtalk.com/threads/hikvision-ivms-playback-failed-error-code-open-sdk-string-error-105-playback-failed.23803/

Hi, try logging into the ivms4200 using the hik connect user details. This will not require port forwarding on the router for remote connections. local machines can be setup with lan ip.

Try using the conventional vulnerability, this machine should be pre 2017, version 3 interface https://ipcamtalk.com/pages/hikvision-password-reset-tool/

Hi there Has anyone had experience integrating into this HikVision device? I see that it has an RS485 connection and was hoping to pass authenticated users to a CAN device or possibly switch on a machine. I prefer not to use the relays that would defeat the authentication requirement. Thanks...

check the gateway on the ip settings of the camera, all devices should have the router IP as gateway

So I have a conundrum, and I apologize in advance if I am wasting time. I have 12 hours of recorded video (Dahua IPC) and it was not set up for motion detection. Is there a way to stream this so that the NVR can then pick up the movement and provide me markers of it? It will of course save me...

Try the code qrqq9Qy9zQ using the following date that you provided for serial number R505456052 year 2012 month 01 day 17

Have you tried the conventional recovery? https://ipcamtalk.com/pages/hikvision-password-reset-tool/

Restore the machine to factory default. the program the network port with a static IP from your range of the plan. Next, from within the plan, ping the local address. lastly, ensure that the DNS and gateway is correct on the machine

Seems that you have a local internet breakout problem. Try inserting the DNS 8.8.8.8 in the network settings of the NVR. then goto Platform access to check if the status shows "online". This should solve your problem.

An easier solution is to modify the IP directly from the SADP. this should solve the IP conflict as the NVR will see the different IP. I have not encountered this problem with this model so perhaps the NVR or camera firmware is corrupt. Maybe flash the firmware (this could be a result of the...

I think that you are a bit late on the reply, about 7 years....

Hikconnect allows you to stream using sub stream whilst recording at mainstream