Recent content by NoDak

As you can see in my previous image post the ball housing is hitting the mount housing in yellow. It's stopping me from adjusting the housing on the x-axis.

Now try to adjust it downward from that position so it looks at a driveway level with the ground plane. Also remember you can only mirror the image. The camera doesnt have the ability to rotate the image 90 degree

That is fine if I don't want a level view of the driveway. Either way it's done with the new mounts.

give you an idea, i tried to rotate the bottom opening to a SW/SE orientation and i was still having an issue of hitting the housing regardless. the highlight in yellow is what the issue was.

actually the problem i was having is that since the mount is attached to a junction box, if i tried to adjust the housing on the X axis the eyeball would hit the housing. since it was mounted on a junction box to a vertical wall it would only rotate 360 on the Y axis. i couldnt move the eyeball...

Well I have the new mounts coming Friday anyway so I will try that. I will have to take a pic to show how this mount is causing me to hit the housing limits

For some of reason i can't get it to position correctly. Maybe I have to loosen something cause to adjust the housing is very tight

I think I just have the wrong mount for the t5442t-ze, I am using the pfa130-e on a vertical wall instead of a pfb203w.

I guess I should clarify, the way they are mounted I can't position the t5442t-ze to were I want them to look since I run into physical limitation of the eyeball housing. The base of the housing is mounted to a vertical wall instead of mounted to a a horizontal plane, ie: like if you mounted...

I currently have 2 x T5442T-ze in the current location that I intend to install the ptz. Not really sure if I will go the ptz route but I am having an issue with getting the t5442t-ze to cover the parking pad correctly. Not sure if it's the mount that I am using (wall mount) instead of the top...

I am looking for some recommendations for ptz camera that empire tech andy sells. I looked on his amazon store and found the following and based on what I can find which would be the best starter ptz. Loryta sd-49225xa-hnr Loryta sd-49425xb-hnr Loryta sd-29204ue-gn I am leaving towards the...

for those that try to config foscam's new F41/FLC Floodlight cam in Blue Iris, you will have to do a manual setup. If you try to use the find/inspect feature of BI it will pick the wrong config. If you use any of the foscam settings you will get a stutter about every 3 secs in the video feed. i...

nevermind found it, forgot to change the media port to 88/888 on another profile.

so i finally recieved mine after ordering, what setting are you using in BI to get a video feed? i am currently using this profile but i get nothing. i've also tried generic/onvif and nothing either. tried the other foscam profiles and nothing either.

Ok Mr. All high and mighty. Like I have time for your pedestrian comments on what is good for me. good thing there is an ignore option for kids like you.