Search results

  1. N

    Empire tech ptz recommend cameras

    As you can see in my previous image post the ball housing is hitting the mount housing in yellow. It's stopping me from adjusting the housing on the x-axis.
  2. N

    Empire tech ptz recommend cameras

    Now try to adjust it downward from that position so it looks at a driveway level with the ground plane. Also remember you can only mirror the image. The camera doesnt have the ability to rotate the image 90 degree
  3. N

    Empire tech ptz recommend cameras

    That is fine if I don't want a level view of the driveway. Either way it's done with the new mounts.
  4. N

    Empire tech ptz recommend cameras

    give you an idea, i tried to rotate the bottom opening to a SW/SE orientation and i was still having an issue of hitting the housing regardless. the highlight in yellow is what the issue was.
  5. N

    Empire tech ptz recommend cameras

    actually the problem i was having is that since the mount is attached to a junction box, if i tried to adjust the housing on the X axis the eyeball would hit the housing. since it was mounted on a junction box to a vertical wall it would only rotate 360 on the Y axis. i couldnt move the eyeball...
  6. N

    Empire tech ptz recommend cameras

    Well I have the new mounts coming Friday anyway so I will try that. I will have to take a pic to show how this mount is causing me to hit the housing limits
  7. N

    Empire tech ptz recommend cameras

    For some of reason i can't get it to position correctly. Maybe I have to loosen something cause to adjust the housing is very tight
  8. N

    Empire tech ptz recommend cameras

    I think I just have the wrong mount for the t5442t-ze, I am using the pfa130-e on a vertical wall instead of a pfb203w.
  9. N

    Empire tech ptz recommend cameras

    I guess I should clarify, the way they are mounted I can't position the t5442t-ze to were I want them to look since I run into physical limitation of the eyeball housing. The base of the housing is mounted to a vertical wall instead of mounted to a a horizontal plane, ie: like if you mounted...
  10. N

    Empire tech ptz recommend cameras

    I currently have 2 x T5442T-ze in the current location that I intend to install the ptz. Not really sure if I will go the ptz route but I am having an issue with getting the t5442t-ze to cover the parking pad correctly. Not sure if it's the mount that I am using (wall mount) instead of the top...
  11. N

    Empire tech ptz recommend cameras

    I am looking for some recommendations for ptz camera that empire tech andy sells. I looked on his amazon store and found the following and based on what I can find which would be the best starter ptz. Loryta sd-49225xa-hnr Loryta sd-49425xb-hnr Loryta sd-29204ue-gn I am leaving towards the...
  12. N

    Foscam F41/FLC Blue Iris Config

    for those that try to config foscam's new F41/FLC Floodlight cam in Blue Iris, you will have to do a manual setup. If you try to use the find/inspect feature of BI it will pick the wrong config. If you use any of the foscam settings you will get a stutter about every 3 secs in the video feed. i...
  13. N

    Foscam F41/FLC firmware posted

    nevermind found it, forgot to change the media port to 88/888 on another profile.
  14. N

    Foscam F41/FLC firmware posted

    so i finally recieved mine after ordering, what setting are you using in BI to get a video feed? i am currently using this profile but i get nothing. i've also tried generic/onvif and nothing either. tried the other foscam profiles and nothing either.
  15. N

    New to BI and looking to dive in

    Ok Mr. All high and mighty. Like I have time for your pedestrian comments on what is good for me. good thing there is an ignore option for kids like you.
  16. N

    New to BI and looking to dive in

    but hey if you want to wire me roughly $538 to pay to run 2 wires of cat 6a from the front of my house to my basement network rack, i will be more than willing remove my setup and go with your suggestion.
  17. N

    New to BI and looking to dive in

    again you still cant read the original post, i guess reading comprehension is not your forte
  18. N

    New to BI and looking to dive in

    probably for the same stupid reason you cant bother to read the original post.
  19. N

    New to BI and looking to dive in

    well finally installed both of the camera's (bought the poe injectors from B&H Photo). they are running thru netgear PLP-2000 adapters (the outlet helps alot on the noise from the poe injectors since it has filters on the outlet on the adapter). just waiting to replace the eufy on the front door...
  20. N

    New to BI and looking to dive in

    anyone know why i cant get h265 encode format? BI shows h264 even though in the settings of the camera show as h265 encode?
  21. N

    New to BI and looking to dive in

    well after fighting for a few hours on getting them to work on the iot vlan, i have them up and running. i guess i mis-took them for ptz camera's when they are not (T5442T-ZE) just zoom and manual placement of camera lens. oh well, guess specs are more important than minor features, maybe next...
  22. N

    New to BI and looking to dive in

    ordered the 2 5442 camera's from @EMPIRETECANDY , be here next week :)
  23. N

    New to BI and looking to dive in

    downloaded new firmware files from dahua for the 5442T-ZE, but they list 2 different ones. DH_IPC-HX5XXX-Volt_MultiLang_NP_Stream3_V2.820.0000000.2.R.210403 DH_IPC-HX5XXX-Volt_MultiLang_PN_Stream3_V2.820.0000000.2.R.210403 so what is the difference between the NP and PN versions?
  24. N

    New to BI and looking to dive in

    @sebastiantombs @wittaj @Flintstone61 thanks for all your advice and help now its just a matter of time (yearly bonus check) to order all the new stuff middle of june :)
  25. N

    New to BI and looking to dive in

    plus with B&H if you use the payboo card, you get a discount that matches your tax cost :) and free shipping if your order is over like $50
  26. N

    New to BI and looking to dive in

    personally i am not to fond of amazon sellers in general (if they are vetted i dont have an issue). i would rather buy from someone like B&H/newegg/best buy where i can return something easily (compared to amazon at times) if it doesnt work out. but thats just me, not indicative of the sellers...
  27. N

    New to BI and looking to dive in

    found one, PoE Injector, 802.3AF SKU: U-POE-AF only $8, now to find someone that has it in stock :)
  28. N

    New to BI and looking to dive in

    so i am guessing a 24v 12w poe injector should work since the max you listed is 10.8w with the IR on, i dont see any poe injector that shows anything close to a 12v one nevermind those are 802.3at poe injectors. need to find 48v ones since those are 802.3af spec'd
  29. N

    New to BI and looking to dive in

    i can get the oem poe injector for like $13 from B&H (since empire tech doesnt sell any) but its only a 2 prong, i would prefer a 3 prong.
  30. N

    New to BI and looking to dive in

    was looking at the unifi line of poe injectors since the small power ones are really cheap $9, heck the 24v 7w is only $6.
Top