Recent content by IceK

Indeed, got it working by using Serial cable and TFTP...

I have a DS-KV6113-WPE1(B) were the button is now blinking after a failed upgrade. It is not visible on SADP and I have also copied the digicap file directly to the SDCARD but I am still unable to complete the upgrade or see the doorbell on the network. Any help would be appreciated or is it...

No problem if I brick it, just wanted to know if there was any later firmware for that model

Thanks, I tried that and it worked, is there any further update or was that EOL

Hi Could anyone help me get the correct firmware for the Dahua NVR listed below:- Sticker on the base of the NVR says NVR4416-16P-4TB in the system it shows the details below type R19939 Record channel 16 Alarm in 16...

For anyone who wants an update, I managed to resolve by deleting and readding the motion and events configuration for each IP camera. This fixed the issue of recording event and Motion detection for each camera

I removed the IP camera, I reverted back to my original camera configuration and the existing IP cameras are still not recording anything. It seems as adding the new IP camera has affected the configuration, in such a way that I may have to reset and start again. Unless anyone else has any...

For the camera that I added, I can't drop the resolution to 2MP, it gives me a parameter error on the DVR. The remaining analogue cameras are recording fine, its just the IP cameras that are not recording. Any other suggestions...

Hi Everyone I have a Hikvision DVR 16 channel DS-7216HQHI-K2 running a few IP cameras that was working fine i.e the IP cameras were recording on the DVR. As, I added another IP camera ALL my recording has stopped on the remaining IP cameras, even though I can view ALL the IP cameras. I don't...

Power supply appears to be OK, however, I will try another one just in case..

Got my lights mixed up. The Power and HDD light are constantly on, however nothing on the display

Hi Guys I have a Hikvision iDS-7208HUH-K1 DVR that will not load up. When powered on the LAN lED light flashes and that is it, nothing else. Any help or pointers would be appreciated....

Hi The IP cameras, have never shown on channel Zero, ONLY BNC. I have compared the configuration to another DVR which is showing the IP cameras. This means that this must be a firmware issue on this particular model. Although I have also tried multiple different firmware. Changing the view to...

id-7208HUHI-K1/4S(B) updated with DVR-K8A3_EUROPE-ML_STD_V4.26.131_210811. Update was OK error in loading shows insmod: can't insert 'extdrv/tp2823.ko': No such file or directory *** ATTENTION!! PLEASE READ THIS NOTICE CAREFULLY ! * Don't power off or anything that interrupt it ! * The...

Thanks, will give it a try