Recent content by figge4

  1. figge4

    Firmware update and Preset List from C6F0SoZ3N0PdL2 B8D-WIFI-5MP-5X B8DWIFI5MP5X

    Hi! Why? 20.x firmwares are quite ok in my oppinion. You take a huge risk bricking your camera. / Fredrik
  2. figge4

    Firmware update and Preset List from C6F0SoZ3N0PdL2 B8D-WIFI-5MP-5X B8DWIFI5MP5X

    The version you have is a good one (24+) and works flawless in my experience. / Fredrik
  3. figge4

    Unable to get other RTSP streams from Herospeed XVR - Only Channel 1???

    Correct url to extract RTSP from a Longse/Herospeed NVR/DVR/XVR is: rtsp:/username : password@ip-adress:554/xy …where X is channel-nr minus 1 (i.e ”0” for channel 1, 14 for channel 15 etc) …and Y is 0 for mainstream and 1 for substream You’re welcome! ;)
  4. figge4

    Multiple RTSP streams cause lag?

    Hi! Has anyone tried to use many (20+) RTSP streams to a NVR? Using Onvif cameras or brand private protocols is no problem. But for cameras not Onvif compatible with the (Longse) NVR - as soon as I configure above 15+ RTSP channels the system becomes very slow and at 25+ cameras its almost...
  5. figge4

    Reseting Hikvision DS-7216HWI-SH/A

    Yes! Now case is solved. The problem was that in mentioned "Reset Tool" - I typed in whole the S/N stated in SADP. In fact, for this DVR in question, it only worked if I left out the initial model destription. And only kept the actual S/N in the S/N-field. That did the magic trick! :) THANKS!
  6. figge4

    Reseting Hikvision DS-7216HWI-SH/A

    Hi! How do I reset a Hikvision DVR like the one in subject line? All help appreciated as I dont work with Hikvision much. The serial nr of it is (according to SADP): DS-7216HWI-SH/A1620150122AAWR500703064WCVU Customer has forgotten their admin password (supervisor who had it got sacked cause...
  7. figge4

    Grayscale videos after DVR replacement

    [ Thank you! That’s one of few settings I’ve still not tried - will check for sure!
  8. figge4

    Grayscale videos after DVR replacement

    Hi! After a switch of DVR (from an older Hikvision DS-7216-HWI-SH/A ) to a brand new DVR (another chinese model ) - all 16 but 3 attached cameras become black/white with interfering diagonal lines. Channels set to Auto video-mode (also tried the different modes manually with same result) All...
  9. figge4

    Best NVR to use, open to all brands?

    We've already tried a few, and YES they work (some chinese brands also help if there is an Onvif compliance issue) so that's not quite correct. What we've found, however, is that compliant NVRs usually have a very low quality (non user-friendly) playback interface. They are not quite as good as...
  10. figge4

    Best NVR to use, open to all brands?

    Of course. But that was not the question, or the solution, for the cases I ask about! :-)
  11. figge4

    Best NVR to use, open to all brands?

    Hi! What would you guys say about preferable NVRs? What brand is best, when it comes to being open to other camera brands? Through Onvif is ok, but it must then be 100% compliant. At the same time, be able to handle at least 32 channels - at minimum 4k resolution. Playback of at least 8...
  12. figge4

    Firmware update and Preset List from C6F0SoZ3N0PdL2 B8D-WIFI-5MP-5X B8DWIFI5MP5X

    Hi! As I've written before, its risky to upgrade those cameras if you don't get the correct firmware from the manufacturer. Thats because there is no logic between different models. Different firmwares are made for different hardware. I have some "newer" firmwares for this camera - but if you...
  13. figge4

    Rebooting switches and POE-cameras remotely

    In fact - a RJ45 (12V) similiar switch would be enough (and probably even cheaper)... are there such products??
  14. figge4

    Rebooting switches and POE-cameras remotely

    Hi forum! :) Is there a smart way to remotely reboot a POE-switch or camera that has frozen (dont reboot even though its set to reboot every night, for example)? I understand this can be done if I have a manageable switch that I can log in to and reset, but is there any other smart way of...
  15. figge4

    How enable Onvif on a old Hikvision camera?

    Yepp I can edit login credentials, IP nr etc through that one. But cant find any onvif setting. Very few settings actually…
See more
Top Bottom