Recent content by ernest1974

Thank you, sir. That is appreciated.

Hi guys. I want to connect a microphone to the audio in of a SD5A425XA-HNR cam. The cam then should record the combined video/audio to a dahua NVR. The mic is wireless and the mic receiver has only an XLR output. How do I wire the XLR to the audio in of the cam? Thank you. PS. From the mic...

Just to follow up. Not sure why, but all of a sudden the mp4 will download from IE. No changes made to system other than rebooting cameras.

Thank you for any/all help. "About IE" states: Version 11.0.9.9600.19356 Update version 11.0.125 (kb4498206) Does this version have known compatibility issues?

Ok. Thank you. I will try Smart Pss. I too get the same option as you've shown for mp4 but for some reason nothing happens when I click ok. It does work however for the dav option.

New dahua nvr. From IE on local network pc I can download recorded video only in dav format. Nothing happens if I select mp4 option. Why?

Correct again! Thank you so much.

Using palemoon seems to function well with PTZ. Trying to setup autotracking on SD5A425GA-HNR. Have created preset. Not seeing option for smartplan nor IVS nor autotracking. Where do I look?

The hard reset of the ptz did the trick. Now I can set the ir illuminator power. In the process however I ran into difficulty with the cam password. The camera, the nvr, and the lan pc - all seemed to NOT agree on the password (intermittently). In other words, I set the same password on all...

I reset the cam with small button in back of ptz and for some reason neither the nvr nor a pc on the lan recognizes the ptz anymore. Ideas?

Thank you. Could you please confirm that the cam itself has the plugin onboard and ready to install into the browser? In other words my nvr LAN is not connected to internet but nonetheless it appears that the plugin gets installed via memory on the cam. Or is internet connection required to...

Tried IE11 on Windows 7 and same result. The illuminator tab fails to open (crashes) and requires re-signing in to camera.

Thank you. I will try that and then report findings.

Thanks for the reply. After mounting cam on building I've tried accessing via the nvr and also on LAN via pc and firefox. During bench testing the illuminator controls did in fact appear on the nvr controls.

I tried swapping power supplies to no avail. Also restarting ptz. The ir LEDs switch depending on zoom but they appear to be at ~50% (guessing here). Why is there no option to adjust the illuminators? Any ideas whatsoever? Please? With sugar on top?