Hi All,
Just bought a few of the T54IR-ZE-S3 from Andy for indoor use. I can't figure out the right way to program a schedule for these cameras with the new gui. Because they are being used indoor the lighting changes consistently throughout the day. Curtains open sometimes vs closed...
unfortunately I upgraded my BI5 from v5.6 to 5.7 and then I started getting all the "events: subscription 8000ffff" errors in BI Log. Based on the threads I read the workaround was to uncheck "Get ONVIF trigger events" in the camera BI configure page and you will still get the IVS triggers...
Thanks again for all the replies! Changed settings on my computer to stop opening MSFT Edge every time I opened Explorer. Made some changes there but still no IVS trigger. Also increased the sensitivity but no trigger either. Good point on the corridor mode, if i remember correctly i think...
Thanks for the replies. Yes the camera IVS was working before at least when i installed it a few months ago :-( Checked logs and no event triggered . Tried the zig zag trip wire and no go. turned off recording to SD and no go either.
Will use codeproject AI on BI till i can figure this...
Not sure what happened but for some reason my IVS just stopped triggering on this camera. Some help on idea of what may have happened or how to fix would be greatly appreciated.
Cam: IPC-T5442T-ZE
FW: V2.840.150GOOD.0.R
Using Microsoft Edge in internet explorer mode to log in
Use BI and CAM...
Attached log file. Initially it had an error on 12/4 but no errors since. Have one T5442T-ZE and 4 Color 4K-T. All the cameras wont switch at the correct time but they switch if i push the "simulate sunrise" or "Simulate Sunset"
Have 5 cameras listed within the tool. The tool works if i push the "simulate sunrise" or "Simulate Sunset" buttons but when i leave it alone it won't ever flip to day or night. On the older gui camera i have the Profile management set to full time. What could i be missing?
I use pushover with Curl.exe to send push notifications on some of my cameras.
When i originally set this up it was working great with instant alerts.
Lately have been getting notification up to 12 hrs later on the same camera. With some within a minute. Seeing other cameras on system doing...
Any recommendation on how to improve the video quality? Is additional lighting my only choice? Currently have illuminator at 8
V3.120.0000000.2.R, Build Date: 2022-10-21
3.6mm version
downloaded video from SDCARD and trimmed it.
did all the above now i do get the key to 1 but lag is still awful.
All my cameras go to 24 port gigabit switch. So does Pfsense router and BI machine. Have rules in Pfsense to block all cam to WAN.
Can't seem to get Blue Iris to run monitor/video or recording without stuttering.
Running System Version:3.120.0000000.2.RBuild Date:2022-10-21.
live view on IE looks great but when vieweing through Blue Iris it stutters like crazy. Task manager on the Blue Iris machine is not reaching...