Recent content by ajwitt

So what is everyone's go to email provider to get away from the likes of gmail and microsoft? Well until whoever that is gets shutdown:banghead:

Ah man I wanted to see them slide through the intersection like they do in the movies LOL. Seriously though, glad they didn't lose it and end up in your house!

@IceK - Smart Detection does not have the intrusion box, that is within the Deep IVS rules. I would recommend setting it up within the web GUI and not SmartPSS. The EIS is turned on on your profile screen where you adjust brightness/contrast etc. Turn that off and that message should go away.

This shows up as an ad for me on this site LOL...

This is a very cost-effective way to get additional POE/Power...I am using several of these. https://www.amazon.com/Loryta-Extender-Repeater-Ethernet-Splitter/dp/B07RQ569MF/ref=sr_1_5?dchild=1&keywords=poe+splitter+loryta&qid=1610475172&sr=8-5

Given what the seller is telling you, I suspect they are hacked cameras and those are prone to issues. Any vendor worth anything would accept a return. And if they are hacked cameras, if you try a firmware update you will likely brick it. As others have said, stick to reputable sellers like...

@IceK - try turning off Smart Motion Detection and then on the Deep IVS screen, you need to select intrusion box - draw a box around the area where you want to start tracking and select enters and appears and it should start working. Is that the best angle you have - that tree takes up too much...

Yes it is! You can do it in Blue Iris as well.

Yep Adobe Flash end of life was 12/31/20 so you got a few extra days out of it. This is an old thread, but it might be useful - you need to see if you can pull the video feed via another method. https://ipcamtalk.com/threads/how-to-access-the-video-streams-of-a-camera-or-nvr.5538/ And this...

Agreed - some of my cams just didn't like H265 or BI didn't like it. I have some on H265 and some on H264 - whichever one was more stable was the one I went with.

I just had the craziest thing happen and what are the odds. I check in daily on my system to check for any activity at night and my LPR camera went to full wide field of view when it switched to daytime. So I have missed quite a few plates in that time. I just pulled up the camera log file...

Post some screenshots of the camera GUI setup - we will be able to tell fairly quickly if autotrack is in it and if so if it is set up correctly.

I have two of these cameras and one has been sitting in the direct sunlight has not had any issues. I have to periodically wipe the dome down, but have to with a bullet camera that is exposed as well. The camera is almost useless during rain events because of the dome being exposed and...

Be sure you updated with a firmware that includes autotracking. Not sure of that particular camera, but one of the PTZs Dahua removed autotracking with a newer firmware. Make sure that you have selected IVS in the smart plan rules and a preset with IVS. Add some screenshots of the relative...

I guess golf is gone.... https://abcnews.go.com/US/blow-trump-golfs-pga-strip-major-championship-trump/story?id=75168540