Review-EmpireTech IPC-B52IR-X3 1/2.8" CMOS 3 × 2 MP bullet cam

Well its 3.6mm which is what I use at most of my entrances.

Remember this is a 2MP camera and all 3 lenses face the exact same direction. It would need to be mounted pretty low otherwise you would get a reasonable image of your entryway with the near lens, and up close shots of your sidewalk concrete grain with the other two
 
  • Like
Reactions: quiet.tea
wittaj said:
Yep problem isn't the camera. Mine works just fine in BI.

It is likely a network bottleneck that BI is detecting.

Or insufficiently powering the camera - ironically I have seen when a POE port is failing because those errors start popping up. When I changed power, the error went away.
Click to expand...
Thanks for pointing me to the network bottleneck. I pinged the cam and noticed the pings jump from 64 to 65. Consistent with the stutters.

Was using built in pc nic, swapped to the spare on the dual nic and it's like a floodgate was opened. I should've done it from the start, but I figured the cams wouldnt need a super fast port.

Appreciate you and bigredfish for the quick help
 
bigredfish said:
Well its 3.6mm which is what I use at most of my entrances.

Remember this is a 2MP camera and all 3 lenses face the exact same direction. It would need to be mounted pretty low otherwise you would get a reasonable image of your entryway with the near lens, and up close shots of your sidewalk concrete grain with the other two
Click to expand...
Good call. Makes sense. That’s what I want sure of is if there was any lens shifting.
 
You must log in or register to reply here.
Top Bottom