Annke Firmware to Hikvision Firmware: HOW TO

Can anyone tell me how to log the n48paw dvr to ivms 4200 via P2P. if I log in via IP, everything works very well, but only in the place where the dvr is installed. on annke vision, after logging in via P2P, theoretically everything works, but I have constant freezes. I suppose there is a different server address in ivms 4200 but I don't know where to change it to the annke server. maybe someone has some ideas?
The problem concerns Annke Vision for Windows, on IOS everything works fine.
 
Last edited:
vu1208 said:
I have version V5.7.1 build 230609. I am looking for version 230627. If your saying V5.7.3_240410 will work as well can you please upload it? Ive been looking for it for days.
Click to expand...
To choose from, take what you like ;)

C800_I91DM_I91DL_I91DS_V5.7.1_230609
V5.7.1_230609

C800_I91DM_I91DL_I91DS_V5.7.1_230627
V5.7.1_230627

C800_I91DM_I91DL_I91DS_V5.7.3_240410
V5.7.3_240410

C800_I91DM_I91DL_I91DS_V5.8.4_241023 (hik firmware)
V5.8.4_241023

C800_I91DM_I91DL_I91DS_V5.8.4_241213 (hik firmware)
V5.8.4_241213
 
neron37 said:
Can anyone tell me how to log the n48paw dvr to ivms 4200 via P2P. if I log in via IP, everything works very well, but only in the place where the dvr is installed. on annke vision, after logging in via P2P, theoretically everything works, but I have constant freezes. I suppose there is a different server address in ivms 4200 but I don't know where to change it to the annke server. maybe someone has some ideas?
The problem concerns Annke Vision for Windows, on IOS everything works fine.
Click to expand...

There is also an iVMS-4200 AC version. AC=Access Control, you can try.
N48PAW, are you sure about DVR? Or NVR?
Look on youtube for tutorials on how to connect via p2p. You can always try the HikConnect version for Teams. For small monitoring installations it is free
 
teditedeusz said:
To choose from, take what you like ;)

C800_I91DM_I91DL_I91DS_V5.7.1_230609
V5.7.1_230609

C800_I91DM_I91DL_I91DS_V5.7.1_230627
V5.7.1_230627

C800_I91DM_I91DL_I91DS_V5.7.3_240410
V5.7.3_240410

C800_I91DM_I91DL_I91DS_V5.8.4_241023 (hik firmware)
V5.8.4_241023

C800_I91DM_I91DL_I91DS_V5.8.4_241213 (hik firmware)
V5.8.4_241213
Click to expand...


I think those are only for the newer D series C800. I have the older I91BL series. I tried upgrading it and it failed. The firmware file for 230609 was 70mb these are only 30 mb. I don't think the firmware exists for these older cameras.. Thank you anyways.
 
  • Like
Reactions: teditedeusz
on old versions there is no 264, if you study the topic, then here they posted firmware from hikvision where there is 264 but, but you will lose resolution up to 6 mp
vu1208 said:
I think those are only for the newer D series C800. I have the older I91BL series. I tried upgrading it and it failed. The firmware file for 230609 was 70mb these are only 30 mb. I don't think the firmware exists for these older cameras.. Thank you anyways.
Click to expand...
 
  • Like
Reactions: teditedeusz
PHILka.RU said:
on old versions there is no 264, if you study the topic, then here they posted firmware from hikvision where there is 264 but, but you will lose resolution up to 6 mp
Click to expand...

Can you post a link to that firmware? I'll take less resolution to get h264. Sure beats buying new cameras
 
burli said:
Hi everyone,

with your help I flashed my first Annke camera already. Everything working good so far!
Now, I purchased a I91DU (NCBR800) camera and flashed to V5.7.19 build 241207

From what I could see, it should be DS-2CD2387G3-LIS2UY/S(L)(RB)

Now, my problem is that the red alarm light is always on. I tried to dealarm in the settings, tinkered around with the lighting but the red light stays on.
Is it a firmware issue or misconfiguration?
Click to expand...
Can't anybody help on this?
 
PHILka.RU said:
reset the camera to factory settings
Click to expand...
I did so...by pressing the button and also software factory reset.
In the meantime I tried several firmware versions with "RB" in the product name.
The show the same behaviour: As soon as the camera is booting up, the red light will turn on and stays active.
 
burli said:
I did so...by pressing the button and also software factory reset.
In the meantime I tried several firmware versions with "RB" in the product name.
The show the same behaviour: As soon as the camera is booting up, the red light will turn on and stays active.
Click to expand...
disassemble the camera, cut the wire from the red lamp :)
 
MilesTEG said:
Hello,
Is it suitable for a I91DM ?

And, how did you manage to find those firmware ?
All I can see on the Annke Download Center is some old firmware, but no one for my C800 I91DM...
Click to expand...
write to annke support. or look here, firmware has been posted many times. I won't look for you
 
Last edited:
Hello

I bought 2 C800 (I91DM camera).
I switched one to HIKVISION Firmware__V5.8.4_241213_S3000619763 directly from the web interface
Everything is better in this firmware except the person / vehicule detection that is not accessible anymore.
is there a way to recover this functionality?

what is better in hikvision firmware:
  • https interface (how http can still be used in 2025 ...)
  • better onvif parameter (check time disable fonction / user management)
  • better security algorithms
  • better UI (but this not a very important point)

what I lack :
- person / vehicule event

on the annke firmware one (V5.7.1 build 230627) I have an issue with onvif and homeassistant
when I try to connect I have an error
Could not authenticate: The action requested requires authorization and the sender is not authorized (code:env:Sender) (subcodes:{}NotAuthorized)
I tried many things (create an other user account / change time settings in UTC / use DST param / change auth method...)
and the one on hikvision firmware run just fine

so I have the same question as MilesTEG is there a newer firmware from annke for this camera from an official repository?
 
Last edited:
neimad said:
Hello

I bought 2 C800 (I91DM camera).
I switched one to HIKVISION Firmware__V5.8.4_241213_S3000619763 directly from the web interface
Everything is better in this firmware except the person / vehicule detection that is not accessible anymore.
is there a way to recover this functionality?

what is better in hikvision firmware:
  • https interface (how http can still be used in 2025 ...)
  • better onvif parameter (check time disable fonction / user management)
  • better security algorithms
  • better UI (but this not a very important point)

what I lack :
- person / vehicule event

on the annke firmware one (V5.7.1 build 230627) I have an issue with onvif and homeassistant
when I try to connect I have an error
Could not authenticate: The action requested requires authorization and the sender is not authorized (code:env:Sender) (subcodes:{}NotAuthorized)
I tried many things (create an other user account / change time settings in UTC / use DST param / change auth method...)
and the one on hikvision firmware run just fine

so I have the same question as MilesTEG is there a newer firmware from annke for this camera from an official repository?
Click to expand...
1) you won't be able to return to annke, it's only possible through the service connector.
2) all your questions have been discussed in this thread more than once.
 
you won't be able to return to annke
Click to expand...
That not what I asked for

all your questions have been discussed
Click to expand...
All my questions?
I have read many page of this topic (not the entire I admit)
I don't have see anything regarding this onvif bug

and except some firmware file hosted on unofficial plateform no annke firmware for my camera.

From last your reply in this thread you seems to be a little aggressive
If you don't want to reply just don't reply
 
I will ;)
if it is so important for you
Click to expand...
it should be for everyone
even if you don't care about your privacy, hacked device (and specially camera) are a pain for internet network and hosting provider.

Actually I don't understand why annke doesn't provide an official open repository with those firmware.
and it's not something that is difficult to make (a simple webserver listing file on it and that's all you need)

I'm not sure I would have bought those camera if I have found that before.
 
neimad said:
I will ;)

it should be for everyone
even if you don't care about your privacy, hacked device (and specially camera) are a pain for internet network and hosting provider.

Actually I don't understand why annke doesn't provide an official open repository with those firmware.
and it's not something that is difficult to make (a simple webserver listing file on it and that's all you need)

I'm not sure I would have bought those camera if I have found that before.
Click to expand...
I have the same thoughts..
Maybe one day, Annke will have such a thing.
Reolink, 5-6 years ago wasn't better at this.
 
You must log in or register to reply here.
Top Bottom