Hi,
I'm in the process of moving off of a LaView NVR (LV-N9808C8E) to a Synology DVA1622. I was able to move my LV-PD51208C dome cameras to a PoE switch, connect with SADP, and reset their IPs away from the NVR IP range and onto my LAN via DHCP, allowing the Synology to see & connect them just fine. But when I try to do the same steps with my LV-PB912F4C bullet cameras, SADP cannot detect them.
I've tried connecting my PC directly to the PoE switch and changing my IP to be in the same range as the cameras, and also tried doing the same steps using a single camera and a PoE injector. In both cases, neither SADP nor Reolink can see the camera. IP Scanner can see the camera's IP address, which matches it's IP from the NVR, but it's unable to ping it. I tried connecting directly to the reported IP address, using different port numbers (e.g., 8000), and still no luck. I also tried SearchTool, but it did not report anything.
Any idea why IP Scanner would see the IP address, but the camera apparently won't respond to anything?
Any other things to try before I climb up on a ladder and try to reset these cameras?
Thanks.
I'm in the process of moving off of a LaView NVR (LV-N9808C8E) to a Synology DVA1622. I was able to move my LV-PD51208C dome cameras to a PoE switch, connect with SADP, and reset their IPs away from the NVR IP range and onto my LAN via DHCP, allowing the Synology to see & connect them just fine. But when I try to do the same steps with my LV-PB912F4C bullet cameras, SADP cannot detect them.
I've tried connecting my PC directly to the PoE switch and changing my IP to be in the same range as the cameras, and also tried doing the same steps using a single camera and a PoE injector. In both cases, neither SADP nor Reolink can see the camera. IP Scanner can see the camera's IP address, which matches it's IP from the NVR, but it's unable to ping it. I tried connecting directly to the reported IP address, using different port numbers (e.g., 8000), and still no luck. I also tried SearchTool, but it did not report anything.
Any idea why IP Scanner would see the IP address, but the camera apparently won't respond to anything?
Any other things to try before I climb up on a ladder and try to reset these cameras?
Thanks.