victorhooi
n3wb
Hi,
I am trying to setup a Dahua IPC-HDBW7842H-Z to do ANPR.
Specifically, my goal is to get license plates as a text overlay on the video footage.
Camera firmware is updated to DH_IPC-HX8XXX-Nobel_MultiLang_PN_V3.000.0000000.2.R.210712, which as far as I'm aware, is the latest version. This is using the new Dahua "5.0" web interface.
I went into the AI section, and enabled the "ANPR" slider, and then clicked "Next"
![1632034582614.png](/data/attachments/102/102073-0d165b5c15517ec2aecd989558d6cf1d.jpg)
It then shows me two tabs - Rule Config and Picture.
Under Rule Config, I've set it to show traffic flow statistics as an overlay, so it shows "Motor Vehicle: <integer"> on the video output.
At first, this was stuck at 0, until I realised that you had to use the "Detection area" tool to draw a yellow box over the screen first.
![1632034662531.png](/data/attachments/102/102076-c466585dfe2041989f9c47c6e846be7e.jpg)
My next step is to go to the "Picture" tab, and tick the extra attributes (e.g. Plate No.) that I also want to overlay:
![1632034704159.png](/data/attachments/102/102077-59a4a24981f41f677c4b563451e4f8a3.jpg)
However, those attributes don't appear on the video output, like the "Motor Vehicle: <int>" counter does.
Is there something I've missed here?
Also, I checked under the "Report" section, ANPR, and there are no license plates listed there - it just says "No Data":
![1632034889198.png](/data/attachments/102/102078-3c8873aba0c53d2074bc6eb724bbe971.jpg)
What's involved to getting license plates to appear in the Report section, and also to get overlaid on the video footage?
Thanks!
I am trying to setup a Dahua IPC-HDBW7842H-Z to do ANPR.
Specifically, my goal is to get license plates as a text overlay on the video footage.
Camera firmware is updated to DH_IPC-HX8XXX-Nobel_MultiLang_PN_V3.000.0000000.2.R.210712, which as far as I'm aware, is the latest version. This is using the new Dahua "5.0" web interface.
I went into the AI section, and enabled the "ANPR" slider, and then clicked "Next"
![1632034582614.png](/data/attachments/102/102073-0d165b5c15517ec2aecd989558d6cf1d.jpg)
It then shows me two tabs - Rule Config and Picture.
Under Rule Config, I've set it to show traffic flow statistics as an overlay, so it shows "Motor Vehicle: <integer"> on the video output.
At first, this was stuck at 0, until I realised that you had to use the "Detection area" tool to draw a yellow box over the screen first.
![1632034662531.png](/data/attachments/102/102076-c466585dfe2041989f9c47c6e846be7e.jpg)
My next step is to go to the "Picture" tab, and tick the extra attributes (e.g. Plate No.) that I also want to overlay:
![1632034704159.png](/data/attachments/102/102077-59a4a24981f41f677c4b563451e4f8a3.jpg)
However, those attributes don't appear on the video output, like the "Motor Vehicle: <int>" counter does.
Is there something I've missed here?
Also, I checked under the "Report" section, ANPR, and there are no license plates listed there - it just says "No Data":
![1632034889198.png](/data/attachments/102/102078-3c8873aba0c53d2074bc6eb724bbe971.jpg)
What's involved to getting license plates to appear in the Report section, and also to get overlaid on the video footage?
Thanks!
Attachments
-
126.6 KB Views: 14
-
126.6 KB Views: 13