I wouldn't say that is entirely accurate. Of course only a real nerd will care about and understand the difference LOL: http://stackoverflow.com/questions/6331075/why-do-you-need-dot-slash-before-script-name-to-run-it-in-bash@klasipca ./ = run
I wouldn't say that is entirely accurate. Of course only a real nerd will care about and understand the difference LOL: http://stackoverflow.com/questions/6331075/why-do-you-need-dot-slash-before-script-name-to-run-it-in-bash@klasipca ./ = run
Thanks, I didn't realize it was a binary. It seemed based on the output klasipca shared that it was a script and was expecting some parameters to be passed along. Can someone point me to the cheapest location for one of these cameras and I will pick one up to start messing with. I figured that the grey market devices are going to be cheaper than the $110 I am seeing on Amazon.Yes, do not cat it, it may mess up your telnet session. These are programs that are part of the open source MTDUtils.
You should post a new thread about this. But I would suggest power cycling the DVR (did you mean NVR?) and if that fails look up a reset procedure (involving a physical reset button on the DVR, if it has one).Dear Admin,
i am facing a very big problem by mistake i have set my resolution wrong in my HIKVISION DVR because of which i am not able to view anything on the attached monitor kindly help me!!1
Search aliexpress for them. You'll find them around $84 from a bunch of sellers, though the popular CCTV CAMERA CHINA seller is on vacation for Chinese new year, there are still a handful of well rated sellers with it for sale.Thanks, I didn't realize it was a binary. It seemed based on the output klasipca shared that it was a script and was expecting some parameters to be passed along. Can someone point me to the cheapest location for one of these cameras and I will pick one up to start messing with. I figured that the grey market devices are going to be cheaper than the $110 I am seeing on Amazon.
YesUpgraded to 5.2.5 with LANGUAGE=1 and Eng day of week on OSD?
Boring :sleeping:Good to know, have not tried that yet. Working with help on the direct hack for 5.2.5 cameras.
Were you looking for some excitement here? Perhaps try a strip club. I hear it cures a boredom for someBoring :sleeping:
Really?Were you looking for some excitement here? Perhaps try a strip club. I hear it cures a boredom for some
telnet 192.0.0.64
Trying 192.0.0.64...
Connected to 192.0.0.64.
Escape character is '^]'.
(none) login: root
Password:
login: can't chdir to home directory '/root/'
# mkdir test
# ls
lib davinci home bin dav_sec sys tmp proc test
sbin usr config dav etc VERSION dev init
# cd test
# ls
# ls
flash_eraseall flash_erase nandwrite mtd5_temp mtd6_temp
# chmod 777 flash_erase
# chmod 777 flash_eraseall
# chmod 777 nandwrite
# ./flash_eraseall /dev/mtd5
flash_eraseall has been replaced by `flash_erase <mtddev> 0 0`; please use it
Erasing 128 Kibyte @ 60000 -- 100 % complete
# ./flash_eraseall /dev/mtd6
flash_eraseall has been replaced by `flash_erase <mtddev> 0 0`; please use it
Erasing 128 Kibyte @ 60000 -- 100 % complete
# ./nandwrite -o /dev/mtd5 mtd5_temp
Writing data to block 0 at offset 0x0
Writing data to block 1 at offset 0x20000
Writing data to block 2 at offset 0x40000
Writing data to block 3 at offset 0x60000
# ./nandwrite -o /dev/mtd6 mtd6_temp
Writing data to block 0 at offset 0x0
Writing data to block 1 at offset 0x20000
Writing data to block 2 at offset 0x40000
Writing data to block 3 at offset 0x60000
# reboot
Connection closed by foreign host.
Username=pcuser,password=pcpassI'm new to linux and computers and need some help. When I try to telnet the Windows share into the camera using "mount -t cifs //192.168.1.100/mtdutils /mnt/nfs07 -o user,password" command it fails and I'm getting "failed: Invalid argument" What am I doing wrong? Thanks.
Try changing your command to the following syntax:I'm new to linux and computers and need some help. When I try to telnet the Windows share into the camera using "mount -t cifs //192.168.1.100/mtdutils /mnt/nfs07 -o user,password" command it fails and I'm getting "failed: Invalid argument" What am I doing wrong? Thanks.