Send motion alarm emails only when alarm input is on?

[Kibul]

Is is possible to set Hikvision IP cam to send motion alarm emails only when alarm input is on?
My IP cam has alarm I/O. I would like to wire it to alarm system so the cam only sends motion trigerred emails when the system is armed.
It sounds logically and simple, but i can see no option like that in Hikvision 5.4.5 firmware.

 

[Securame]

I would say that the answer is NO, but I would love to be proven otherwise.

 

[cutterman]

Does your NVR have an alarm input? If so you could connect the hardwired alarm output of the camera and alarm system in series connected to the alarm input on NVR

 

[slodat]

Does your NVR have an alarm input? If so you could connect the hardwired alarm output of the camera and alarm system in series connected to the alarm input on NVR

Is there a way to do this in Hikvision NVR??

 

[Securame]

Is there a way to do this in Hikvision NVR??

Yes; but you would need a physical wire from the alarm system and the camera to the NVR, or at least a physical wire from the alarm system to the NVR, plus an alarm output on the NVR.

(but this is not what the OP was asking for)