Mini PTZ V2 PTZ controls inverted after FW upgrade

C

caeks

n3wb
Jan 24, 2016
5
0
AUS
Hey Guys

I have a mini PTZ V2 with S2l chip currently running IPNC_S2l2.0.1_build201606201315 firmware
Out of the box everything worked fine however since upgrading the firmware all the PTZ controls are inverted. As far as I can tell everything else still works fine. I have tried all other firmware versions that I can find on these forums with no luck.

Has anyone else had any similar problems?

Thanks
 
I believe that's the version that introduced that bug. @klasipca commented on it in one of his threads.
I've not yet seen any newer firmware posted.
 
Last edited by a moderator:
alastairstevenson said:
I believe that's the version that introduced that bug. @klasipca commented on it in one of his threads.
I've not yet seen any newer firmware posted.
Click to expand...

Ahh okay, so it is a known issue, If that was the version that introduced it, shouldent rolling back fix it?

vasycara said:
You have IPNC_S2l2.0.1_build201606201315
and here is IPNC S2l2.0.1_build201607221508
Click to expand...


Sorry, Yeah I am currently running 201606201315 but have tried IPNC S2l2.0.1_build201607221508 previously with no luck.
 
caeks said:
Thanks, but I have tried all the versions in that thread. Even the older versions seem to have a same problem :/ Have tried upgrading via web interface and the batch control program.
Click to expand...
I have a mini PTZ V2 with S2L chip and works well with all these firmware.
 
I am running a new firmware camera work greats. Asking jack to send me the firmware

Sent from my SM-G930T using Tapatalk
 
Currently running PTZ V2 Model 7
Program Version V2.0.1 Build 201608091810S
Control Version MiniPtz_V2.0.1_build201607291544
Web Page Version 1.1.1 Build 20160809
Plugin Version 2.0.1.45

Sent from my SM-G930T using Tapatalk
 
I have the same problem, that after updating the firmware the PTZ-Control is reversed in the directions.

[TABLE="class: deviceTable"]
[TR]
[/TR]
[TR]
[TD="class: deviceInfoTd"]Model[/TD]
[TD="class: deviceInfoTdWhite"][/TD]
[/TR]
[TR]
[TD="class: deviceInfoTd"]Serial No.[/TD]
[TD="class: deviceInfoTdWhite"]10D19B57138EB362B3[/TD]
[/TR]
[TR]
[TD="class: deviceInfoTd"]Program Version[/TD]
[TD="class: deviceInfoTdWhite"]V2.0.1 Build 201607221508S[/TD]
[/TR]
[TR]
[TD="class: deviceInfoTd"]Control Version [/TD]
[TD="class: deviceInfoTdWhite"]MiniPtz_V1.0.2_build201607111019[/TD]
[/TR]
[TR]
[TD="class: deviceInfoTd"]Web Page Version[/TD]
[TD="class: deviceInfoTdWhite"]1.1.1 Build 20160303[/TD]
[/TR]
[TR]
[TD="class: deviceInfoTd"]Plugin Version[/TD]
[TD="class: deviceInfoTdWhite"]1.0.4.43
[/TD]
[/TR]
[/TABLE]

Could anyone help me, i have tried several versions, but i couldn´t fix the problem. everything elso is working correct on the camera.
 
The problem stay with the reverse PTZ directions. The zoom works, therefore i didn´t make the Kernel update, correct ?

[TABLE="class: deviceTable"]
[TR]
[/TR]
[TR]
[TD="class: deviceInfoTd"]Model[/TD]
[TD="class: deviceInfoTdWhite"][/TD]
[/TR]
[TR]
[TD="class: deviceInfoTd"]Serial No.[/TD]
[TD="class: deviceInfoTdWhite"]10D19B57138EB362B3[/TD]
[/TR]
[TR]
[TD="class: deviceInfoTd"]Program Version[/TD]
[TD="class: deviceInfoTdWhite"]V2.0.1 Build 20161012152123S[/TD]
[/TR]
[TR]
[TD="class: deviceInfoTd"]Control Version [/TD]
[TD="class: deviceInfoTdWhite"]MiniPtz_V1.0.2_build201607111019[/TD]
[/TR]
[TR]
[TD="class: deviceInfoTd"]Web Page Version[/TD]
[TD="class: deviceInfoTdWhite"]1.1.1 Build 20160303[/TD]
[/TR]
[TR]
[TD="class: deviceInfoTd"]Plugin Version[/TD]
[TD="class: deviceInfoTdWhite"]1.0.4.43[/TD]
[/TR]
[/TABLE]
 
DavidReam said:
Has anyone resolved the inverted control issue yet? I'm working with my vendor I purchased the camera from, but being it's China and a 14 hour difference it's hard to get timely answers. On a side note, I first contacted the seller due to the camera constantly rebooting during the day and night. So they sent me a new firmware file once i found out what chipset i had. So i followed their instructions and flash the firmware file and then a kernel file and from there on the past several days the camera ptz controls are inverted. Before contacting the vendor I purchase a poe splitter cable to change from poe to using the external 12v cord on camera. Still have the rebooting issues afterwards. Any thoughts or suggestions would be appreciated.
Click to expand...


vendor resolved
 
You must log in or register to reply here.
Top Bottom