hi everyone, i recently learned (from this forum) what zone crossing is and I love it. It has changed my life. Thanks to the great videos i have minimized my alerts drastically from the sun and wind. I have one cam that i cannot get to where i want it and was hoping someone might have some experience with this. I have been playing with this bullet Hikvision cam for quite some time and started with 3 zones and than i maxed out the zones to A-F for testing purposes but i still cannot get it just right. I cannot get it to sense me walking to the gate (see screen shot below), and only sometimes does it actually fire when i open the gate all the way. I made large zones and then i made a bunch of small zones (arrows below pointing to them) but I would like to the cam to start recording when i am walking to the gate. any help would be greatly appreciated. thanks
PS screen shots included and the one that shows all the zones was for screen shot purposes only, I turned off the entire zone so you all can see the different zones.
![Screen Shot 2019-08-12 at 6.37.53 PM.png](/data/attachments/45/45926-64de6faf6d1a6efe62f07b2398f29712.jpg)
PS screen shots included and the one that shows all the zones was for screen shot purposes only, I turned off the entire zone so you all can see the different zones.
![Screen Shot 2019-08-12 at 6.38.22 PM.png](/data/attachments/45/45924-91b00dc7a2315b5bc574a708b0a2c6fc.jpg)
![Screen Shot 2019-08-12 at 6.38.02 PM.png](/data/attachments/45/45925-5ef76731c07d10561d778e24f916b056.jpg)
![Screen Shot 2019-08-12 at 6.37.53 PM.png](/data/attachments/45/45926-64de6faf6d1a6efe62f07b2398f29712.jpg)