Zmodo And BI

Welcome to the forum....the cams may not work standalone....however you should be able to pull the streams from the NVR..try the Zmodos from the drop down list..
As far as the cams..see if you can pull login to them when the are connected to the network...if so they may be sending an rtsp stream, but its hard to know..
 
fenderman said:
Welcome to the forum....the cams may not work standalone....however you should be able to pull the streams from the NVR..try the Zmodos from the drop down list..
As far as the cams..see if you can pull login to them when the are connected to the network...if so they may be sending an rtsp stream, but its hard to know..
Click to expand...


Thanks, Fender. Fellow music man? :)

How does it work when you pull from an NVR? Can you only see 1 camera?


thx

bob
 
yes, music man :)
No there is a separate stream for each cam..you can select the camera in blue iris (in the setup page where you select the NVR you can choose camera 1,2,3 etc
 
Got it hooked up. Can view separate cams and nvr in a browser but BI won't see any of them. tries all the zmodo presets, using port 8000, no go!


thx

bob
 
You must have a setting wrong...check ip address, port, username, password....
Confirm the rtsp port on the zomodo itself..
looks like you should be using the zomdo ZH/ZMD option...
 
fenderman said:
You must have a setting wrong...check ip address, port, username, password....
Confirm the rtsp port on the zomodo itself..
looks like you should be using the zomdo ZH/ZMD option...
Click to expand...


How do I confirm the rtsp port on the zomodo itself?

thx

bob
 
Looks like a post got delete. I'm able to view cameras using the IP Cam Viewer app on my phone. In and out of my local network. Ports are open and working.

bob
 
Are you 100% cetain about the ip address and ports? There should be a network settings page in the zmodo that should list the info..
 
fenderman said:
Are you 100% cetain about the ip address and ports? There should be a network settings page in the zmodo that should list the info..
Click to expand...

Positive, Like I said, the settings work fine in IP Cam Viewer, in and out of my local network; port 8000 is listed as the port for the video stream and is what works logging in on IE.

thx

bob
 
try using port 8000 as the rtsp stream and see if it works....ipcam viewer may be pulling the video in a different manner...
 
So, try every zmodo option in the pull down menu using http port 8000 media/video/rtsp and port: 10554 and attempt auto-configure on http, rtsp and port: 8000?

thx for your help

bob


edit: Tried the above, no go
 
Last edited by a moderator:
You must log in or register to reply here.
Top Bottom