Ken, I found something that may help pinpoint the issue I am seeing. I had a dog trigger the SE camera on 2 separate events about 3 hours apart. There were 7 images in total. I reviewed the camera with motion only and none of the images displayed. So while viewing them 1 at a time and I noticed the first image had a confidence level of 40%. The confidence for any mammal was set to 42% so I lowered it to 40%. I then noticed that there were 4 of the 7 images with a confidence level of 42% or greater which should have fired an alert. Image of the log below and 2 of the images.
View attachment 81324View attachment 81322View attachment 81323
I then turned on the detailed logging and changed the name of the images and pasted them into the AiInput folder 1 at a time and all of the images fired an alert this time. I did not restart OnGuard. I just modified the AOI lowering the confidence level of any mammal. This log is OnGuard2.txt.
I then took the same 6 images I used from the test in post 417, changed the name again and pasted them into the AiInput folder. This time only the first 2 images triggered an alert. The log is the 02a attachment. I repeated and got the same result. I then lowered the confidence level of any mammal for the AOI and saved it and ran it through again. This time all 6 images fired alerts for the car. This log is the 02c attachment.
So the problem goes away either after a restart of OnGuard or a modification of the confidence level of an AIO. Perhaps OnGuard is losing the AOI settings and either a modification or restart corrects this.
The problem is that interesting objects are not always marked as interesting so they are not displayed when choosing motion only. The problem is sporadic affecting at least 2 and maybe more of my cameras. MQTT alerts are also not fired for theses images. When viewing these images without the motion only filter selected they exceed the confidence level and a second pass with the motion filter selected will display these images as having motion.
One thing to note about my cameras. The are fixed position and have a constant resolution from the sub stream for jpg generation.