setting up another system and with what I went through on the 7108 recently where I can't reach the camera behind the POE ports I need to find one that will not have this issue so I can setup email alerts on the camera to attach image without jumping through a million hoops. Any recommendation?
which NVR has virtual host?
- Thread starter dannieboiz
- Start date
I'm using DS-7108N-SN / P with V3.0.7 build 140805 I asked the vendor for new firmware but they said it's not available.
whoslooking
IPCT Contributor
Well your seller is full of shit, see below in my signature for an upgrade.
The virtual host is also on my 7832n, it not on the 7100 series nvr's
The virtual host is also on my 7832n, it not on the 7100 series nvr's
hiky
Getting the hang of it
whoslooking
IPCT Contributor
No, its just a basic entry level nvr, but still good value.
If you have the 7108n-sn/p just plug your pc into on of the Poe ports to access the camera web page to make fine adjustments
If you have the 7108n-sn/p just plug your pc into on of the Poe ports to access the camera web page to make fine adjustments
Hi all,
I'm in the same predicament as Dannieboiz whereby I need to access the individual cameras on my DS-7108N-SN/P which is running firmware V3.0.7 build 140805.
Has there been upgraded firmware with virtual host for this device? if not, can this be overcome in another way?
Thanks in advance
Robert
I'm in the same predicament as Dannieboiz whereby I need to access the individual cameras on my DS-7108N-SN/P which is running firmware V3.0.7 build 140805.
Has there been upgraded firmware with virtual host for this device? if not, can this be overcome in another way?
Thanks in advance
Robert
Securame
Pulling my weight
You can try the latest firmware, 3.0.17, and check out for yourself (not recommended if you have a chinese unit).
http://www.hikvisioneurope.com/portal/index.php?dir=Product Firmware/Recorder/DS-7100NI-SN/
I do not think you will get virtual host with DS-71xx series. If you just need to access the cameras to do some configuration, plug your computer on one of the integrated POE ports.
Thanks for the reply, as you say I bought the unit from China which has also probably been modified to English language therefore I'm not keen to change firmware unless someone can confirm that it will definitely provide Virtual Host.
It's not just for configuration, I would like to stream the camera to a 3rd party monitor client but of course the camera is currently inaccessible to the home LAN since it's via the NVR
Has anyone overcome this on a DS-7108N-SN/P?
It's not just for configuration, I would like to stream the camera to a 3rd party monitor client but of course the camera is currently inaccessible to the home LAN since it's via the NVR
Has anyone overcome this on a DS-7108N-SN/P?
Securame
Pulling my weight
I am not even sure if virtual host would help you there. I have hardly used it, but I think that with virtual host you only get access to the web port of the camera, so you can tweak the config, access the web interface, etc.
I do not know if it also exposes the RTSP and SDK ports. I'd like to hear more from someone who has used it more
Do not try to update the firmware if you have a chinese unit. It would be easier for you to just connect that one camera on your lan.
I do not know if it also exposes the RTSP and SDK ports. I'd like to hear more from someone who has used it more
Do not try to update the firmware if you have a chinese unit. It would be easier for you to just connect that one camera on your lan.