HI all. Another question please! Here's the setup so far:
Dahua DHI-NVR5216-16p-4ks2e
Cameras so far:
1. IPC-t5241-as-pv 2mp 2.8mm (same as IPC-hdw5241h-as-pv
2. IPC-e3541f-as-m 5mp 2.8mm (same as dh-ipc-hdbw3541f-as-m)
3. IPC-t5442tm-as
Now, until yesterday all was going ok. I was getting into the system via the direct GUI, which in my case was 192.168.1.4, pretty much from any apple or pc device in the house.
Suddenly, this login won't work on any device at home (using various browsers, both mac and pc based), and the NVR does not appear on the traffic manager on my router. The NVR is definitely turned on and plugged into the network. I can still see everything via iDMSS Plus.
I've turned every device in the chain off and on. All firmware was up to date.
What's happened?
Cheers! Mat
Dahua DHI-NVR5216-16p-4ks2e
Cameras so far:
1. IPC-t5241-as-pv 2mp 2.8mm (same as IPC-hdw5241h-as-pv
2. IPC-e3541f-as-m 5mp 2.8mm (same as dh-ipc-hdbw3541f-as-m)
3. IPC-t5442tm-as
Now, until yesterday all was going ok. I was getting into the system via the direct GUI, which in my case was 192.168.1.4, pretty much from any apple or pc device in the house.
Suddenly, this login won't work on any device at home (using various browsers, both mac and pc based), and the NVR does not appear on the traffic manager on my router. The NVR is definitely turned on and plugged into the network. I can still see everything via iDMSS Plus.
I've turned every device in the chain off and on. All firmware was up to date.
What's happened?
Cheers! Mat