Web server : problems specifying correct port when 3 exist.

[master_tinkerer]

I have 3 network ports, 192.168.0.7 8, 9 and 10. 7 and 9 are connected to VLan at switch. 8 is connected to router supplying wifi to iPad and BI app.
when I restart BI, it will pick 7 typically. So I set the bind exclusively flag and pick 8 and restart and it picks 8, but won’t allow connection until I un mark the bind exclusively flag, with no other change.
After that , it is working, But I look at the Local , internal access and 8 is not shown( shows 7) and 8 or 9 are not in the list.
I will try to show with a series of pictures from my iPad
First case
View attachment 187056
iPad won’t connect after BI restart.View attachment 187061
Look at web server tab, bound to 7 but I show list

Restarted BI and got non working iPad and this status on web server:


View attachment 187062
If I uncheck binding it works

but now trying to document, I updated the latest and it seems to work correctly.

No. Restarted with 8 bind exclusively and iPad won’t connect.


View attachment 187063
If I uncheck bind exclusively, and click ok,

iPad connects

status with connection
It shows 7, but works and I know BI is responding to 8 cause WiFi is only on 8

View attachment 187065

Open to suggestions, thanksView attachment 187061View attachment 187062View attachment 187063View attachment 187065

 

[master_tinkerer]

Apologies for picture mess. Done on iPad with poor results.
maybe a screen capture video will work better.

 

[bigredfish]

I’m not a networking expert but I recommend you remove those images asap with your WAN IP and ports

 

[master_tinkerer]

Deleted pictures. Will try to redo with no network addresses showing.