Wall mount bracket for the Hik 110mm (DS-2CD2145FWD-IS)

[creativetechnician]

HI

I need a Wall mount bracket for the Hik 110mm (DS-2CD2145FWD-IS) the Hik brackets WM110 has a too small cavity especially if the camera has the I/O ports, the Dauah PFB204W is a prefect wall mount works perfectly, but had to drill the holes for the screws.

Any input is greatly appreciated

Thank you

 

[fstfrd50]

I normally use the cam mount model # JB-TZ for all my camera’s, purchased at Nelly’s Security that is slightly over-sized for dome, turrets and bullet camera bases. Best part that there’s approximately 2.315. depth of space to tuck in the wires, with a 5 inch ++ diameter base to work with. The holes are pre-drilled and threaded with I believe it’s metric. Hope that helps.





Sent from my iPhone using Tapatalk

 

[creativetechnician]

@fstfrd50
Thanks for your input, that's a back or junction box, I'm looking for a wall mount bracket.

 

[k110]

There are 3 compatible wall mounts for your camera, scroll down to last page: DS-2CD2145FWD-IS_Datasheet_V5.6.0_20201230.pdf (hikvision.com)

 

[creativetechnician]

@k110
Thanks, The DS-1272ZJ-110 is too bulky, the DS-1258Zj has no room for the sound and I/O ports.