Video Breakup

essjay

essjay

Getting the hang of it
May 12, 2016
263
74
Eire
Having an issue with the video breaking up as shown in the below recording. The camera is a Dahua HFW8630E-Z, 15fps, 30 iFrame, about 10000 bit rate.

Receiver Buffer in BI set to 20MB (max)

Any ideas?

 
You also need to match the iframe interval to the fps....
make sure windows is set to high performance and the hard drive is set to never sleep.
 
  • Like
Reactions: essjay
fenderman said:
You also need to match the iframe interval to the fps....
make sure windows is set to high performance and the hard drive is set to never sleep.
Click to expand...

Yeah the drives should never sleep as the other 6 cameras (not including this one) are set to continuously record. Just set it to high performance anyway and set the discs to never sleep just in case.
 
essjay said:
OK, setting the bitrate down to 4096 seems to have fixed the issue. I'm able to raise it up to 8192 without the image breaking up.
Click to expand...

Funny. I have Dahua cams as well, and 8192 is my maximum before I have issues too. Crappy hardware I guess, mine are the cheap Chinese knockoffs.
 
You must log in or register to reply here.
Top Bottom