Updated BI to 5.8.1.5 and now my EmpireTech Cam wont alert anymore

[speedway1213]

IPC-T5442TM-AS-3.6mm
Used to work fine on the older version of BI, alerting thru pushover.
Now - I cant get any alerts. Nothing changed except updated blue iris.

Pushover works (Manual alert via BI)
But something must be going on with the signals coming from the camera over to BI (via ONVIF?) I tried rebooting everything (cams, system), deleted and readded the camera in BI etc. Dont know whats up.

 

[wittaj]

Is it throwing any errors in the log or the little yellow triangle?

What version did you come from?

In the camera GUI, Under Network > Access Platform, turn onvif authenticator off and see if that fixes it.

 

[speedway1213]

This specific cam is not throwing any yellow excalamination marks, but the other cams I have on my network (total of 23) are. Anyway for this specific cam < I turned off the Onvif authenticator and it seemed to work!
How did you figure that out?

 

[looney2ns]

Roll back to the last stable version.

 

[speedway1213]

5.8.1.5 is stable.