Hi folks! I want to connect an Uniview dual ptz camera (IPC9312LFW) to a dahua xvr (XVR5116HS). When I add the camera on the xvr I only get the stream from one of the two channels, but I can’t get both.
In the zahi config the camera is added as onvif and lists only one channel.
The camera works fine with ezstation from Uniview but I cannot get the second stream into the xvr.
Any help appreciated
It’s a late response, but you will need to use RTSP on the second channel. Uniview has the RTSP address on their website. Look for the section labeled sensor 2, or something like that.
You’ll need to use/create a custom protocol on your nvr to input the RTSP address. Use this custom protocol on the channel of the nvr which you want the second lens to display.
It will be audio/video only. Your Dahua app will not do PTZ functions. You’ll need to use the Uniview phone app, or the camera browser, to control the camera, but your Dahua app/nvr will handle recording & playback.
