Tripwire recording cuts off too soon on NVR4216

[tomas21]

I recently setup my SD42212 PTZ with the latest firmware that support IVS w/ Tripwire. My NVR4216 has also been updated to the latest firmware supporting IVS.

The NVR activates and records the Tripwire that I setup on the Camera but it cuts off too soon. Does anyone know the setting either on the NVR and or PTZ that would enable the Tripwire to record a little longer?

 

[nayr]

Record Delay is what you want to extend, by default its like 10s: https://dahuawiki.com/EventVideoDetect

 

[tomas21]

Strange thing is my SD42212 has no delay option for the IVS settings. And on the camera there is no event settings for IVS.
If I got into the NVR it has a delay setting for the Event IVS settings but it doesn't make a difference what I set it at.

Camera Settings


NVR Settings

 

[nayr]

thats odd, mine does.. i suspect your camera was one of the early ones w/tripwire, probably added later on once people missed it.

 

[tomas21]

Bummer.. so the camera firmware was probably a miss in those settings.

NAYR - What browser on a MAC do you have the web gui working for the cams?