Trigger Remote Alarm

Jim Grady

Jim Grady

n3wb
Apr 24, 2017
5
0
Hi

I have BI set up monitoring my shed and it send an alert to my mobile if any motion is detected.

It would be nice if it would trigger an alarm sound (or similar) in the shed as well.

Can you get BI to output to a camera speaker or trigger an affordable remote alarm? How do people usually do this?

The BI software is running in the house and is a long way from the shed. :-(

Thanks in advance.

Jim
 
@Jim Grady Personally, I don't use PC speaker because my BI PC is too far away. I do have Vera home automation, which can control all my Zwave wall switches and power outlets. In my case, when BI detects motions, it sends a web services call (also configured in the above screen) to Vera. Vera turns on a Zwave outlet which powers an alarm siren. The siren is loud (100db). Vera will turn off siren after X minutes.
 
Hi

Thanks for your responses. I like the idea of sending the alarm to the camera speakers, I forgot that option was there. Last time I tried this I couldn't get this to work. How would I know if the camera has a compatible speaker? Are there camera models that anyone would recommend for this feature? Thanks

Jim
 
@Jim Grady I don't have a camera with speaker so I can't answer that question. As noted above, I use Vera home automation. Hopefully, someone else will chime in.
 
@Jim Grady Another idea: if your camera has alarm I/O pins, you can then connect to a relay which can turn on a local siren. Then you could possibly trigger this camera I/O pin via BI. See screenshot below. (Again, I'm not doing siren this way because I have a Vera, but you should maybe look into this.)

Screen Shot 2017-12-23 at 8.13.58 AM.png
 
You must log in or register to reply here.
Top Bottom