devastator
Getting the hang of it
Hi,
I'm trying to setup BlueIris to record when my HikVision camera senses motion using 'Line Crossing'. I want to try it doing this way versus using BlueIris motion detection because I get a lot of false positives with it (e.g. when the lights go on at night).
I followed this guide, and I can see the status toggle when I browse to http://<url>/outputs/1/status/, however nothing happens in BI.
I've disabled motion detection and enabled 'Triggered using cameras builtin alarm or motion', but nothing gets recorded.
Anyone had success setting this up ?
I'm trying to setup BlueIris to record when my HikVision camera senses motion using 'Line Crossing'. I want to try it doing this way versus using BlueIris motion detection because I get a lot of false positives with it (e.g. when the lights go on at night).
I followed this guide, and I can see the status toggle when I browse to http://<url>/outputs/1/status/, however nothing happens in BI.
I've disabled motion detection and enabled 'Triggered using cameras builtin alarm or motion', but nothing gets recorded.
Anyone had success setting this up ?
