I have a new 100 ft aluminum 3 leg tower going in and plan to put several ptz cameras on the top. The tower is above most of the trees. My thought was to run 120 v (like 2 conductor #12) power up to the "distribution box" where there would be the ip bricks. The cameras are expensive(relatively) so that is the primary goal to protect them --one 2 meg and two 8 meg. I thought about a switch and a fiber converter to be near the cameras and the fiber down the tower to my house switch and another converter. I would add a copper ground cable down two of the three legs ( 250 ft spool is cheaper) connected to the very top above the cameras and ground rods at base. The plan is the copper cables 1/0 would carry most of the current and so might the AL tower so that the #12 and fiber would survive. I know lightning can very widely so big strikes, it toast.
Any thoughts or additions. This is for Eagle watching
Any thoughts or additions. This is for Eagle watching
