joeusernumber100
n3wb
I am running 1.67 with cloned cameras - no issues.Is 1.67 compatible with using a clone cam as I do with 1.65?
I am running 1.67 with cloned cameras - no issues.Is 1.67 compatible with using a clone cam as I do with 1.65?
yes!Is 1.67 compatible with using a clone cam as I do with 1.65?
Rest assured you are not alone. I have the same issue.I just upgraded to 1.67 and am trying to get the memo=[summary] function to work. Here is the URL I am using [ip]:81/admin?trigger&camera=LivingRm&memo=[summary]&user=[user]&pw=[pw], but I do not see the summary show up in BI. It is only showing the "bvr H265 New" at the bottom of the clip. Is there something else I need to configure in BI to have it show on the clips? Running BI 5.3.1.5 Any help is greatly appreciated!
Try this:I just upgraded to 1.67 and am trying to get the memo=[summary] function to work. Here is the URL I am using [ip]:81/admin?trigger&camera=LivingRm&memo=[summary]&user=[user]&pw=[pw], but I do not see the summary show up in BI. It is only showing the "bvr H265 New" at the bottom of the clip. Is there something else I need to configure in BI to have it show on the clips? Running BI 5.3.1.5 Any help is greatly appreciated!
In addition to pmcross' answer:I just upgraded to 1.67 and am trying to get the memo=[summary] function to work. Here is the URL I am using [ip]:81/admin?trigger&camera=LivingRm&memo=[summary]&user=[user]&pw=[pw], but I do not see the summary show up in BI. It is only showing the "bvr H265 New" at the bottom of the clip. Is there something else I need to configure in BI to have it show on the clips? Running BI 5.3.1.5 Any help is greatly appreciated!
This has worked for me, thank you for your help. I had been using:Try this:
BI IPort/admin?camera=LivingRm&trigger&memo=[summary]&user=XXXX&pw=XXXXX
Sent from my iPhone using Tapatalk
Thanks for the help ReXX, but I did make that change. The error, shown above, is different but still in an error state.I already gave you the solution in the other thread.
You need VISION-DETECTION=TRUE
When Deepstack starts and lists the v1/xxx urls.. is v1/vision/detection listed?Thanks for the help ReXX, but I did make that change. The error, shown above, is different but still in an error state.
Scott
When Deepstack starts and lists the v1/xxx urls.. is v1/vision/detection listed?
In your post you still have v1/vision/scene listed.
ReXX, evidently case matters in the startup. TRUE didn't work but True did. It now status' /v1/vision/detection after startup.That's not right.
It need to list v1/vision/detection before it works.
Have you tried the run command with :noavxHoping someone can help with my problem. I'm using DeepquestAI running on the same computer that BI runs, Windows 10, i7 6700 with 48 gigs RAM, and the AI Tool version 1.67 but I wanted to offload this computer which hovers between 85 and >95% CPU utilization most of the time (I have 7 HD cameras and 8 UHD cameras).
I installed Docker on a separate computer running Ubuntu Desktop 20.04 LTS, 4 gig RAM, Intel Celeron CPU. Docker install went well, no errors, then installed Deepstack which also went well and runs seemingly ok.
However, when I point AI Tool to this Linux computer I'm getting these errors
AI Tool is configured in the Windows firewall.
UFW is not enabled on the Lunix box.
Any help or suggestions is appreciated.
COMMAND TO START DEEPQUEST AI ON UBUNTU
sudo docker run -e VISION-DETECTION=TRUE -v localstorage:/datastore -p 82:5000 deepquestai/deepstack
DEEPQUEST AI SCREEN OUTPUT
/v1/vision/scene
---------------------------------------
v1/vision/addmodel
---------------------------------------
v1/vision/listmodels
---------------------------------------
v1/vision/deletemodel
---------------------------------------
---------------------------------------
v1/backup
---------------------------------------
v1/restore
[GIN] 2020/08/02 - 17:53:15 | 403 | 274.22µs | 192.168.1.24 | POST /v1/vision/detection
[GIN] 2020/08/02 - 17:53:15 | 403 | 72.503µs | 192.168.1.24 | POST /v1/vision/detection
[GIN] 2020/08/02 - 17:53:15 | 403 | 59.593µs | 192.168.1.24 | POST /v1/vision/detection
[GIN] 2020/08/02 - 17:53:15 | 403 | 62.307µs | 192.168.1.24 | POST /v1/vision/detection
[02.08.2020, 14:19:31.171]:
[02.08.2020, 14:19:31.179]: Starting analysis of G:\aiinput\SRTSD.20200802_141930810.jpg
[02.08.2020, 14:19:31.190]: (1/6) Uploading image to DeepQuestAI Server
[02.08.2020, 14:19:31.205]: (2/6) Waiting for results
[02.08.2020, 14:19:31.213]: (3/6) Processing results:
[02.08.2020, 14:19:31.221]: System.NullReferenceException | Object reference not set to an instance of an object. (code: -2147467261 )
[02.08.2020, 14:19:31.232]: ERROR: Processing the following image 'G:\aiinput\SRTSD.20200802_141930810.jpg' failed. Failure in AI Tool processing the image.
[02.08.2020, 14:19:36.579]:
[02.08.2020, 14:19:36.591]: Starting analysis of G:\aiinput\GTHSD.20200802_141936570.jpg
[02.08.2020, 14:19:36.603]: (1/6) Uploading image to DeepQuestAI Server
[02.08.2020, 14:19:36.627]: (2/6) Waiting for results
[02.08.2020, 14:19:36.634]: (3/6) Processing results:
[02.08.2020, 14:19:36.641]: System.NullReferenceException | Object reference not set to an instance of an object. (code: -2147467261 )
[02.08.2020, 14:19:36.648]: ERROR: Processing the following image 'G:\aiinput\GTHSD.20200802_141936570.jpg' failed. Failure in AI Tool processing the image.
[02.08.2020, 14:19:36.660]:
[02.08.2020, 14:19:36.675]: Starting analysis of G:\aiinput\DWNSD.20200802_141936591.jpg
[02.08.2020, 14:19:36.683]: (1/6) Uploading image to DeepQuestAI Server
[02.08.2020, 14:19:36.695]: (2/6) Waiting for results
[02.08.2020, 14:19:36.706]: (3/6) Processing results:
[02.08.2020, 14:19:36.713]: System.NullReferenceException | Object reference not set to an instance of an object. (code: -2147467261 )
[02.08.2020, 14:19:36.723]: ERROR: Processing the following image 'G:\aiinput\DWNSD.20200802_141936591.jpg' failed. Failure in AI Tool processing the image.
I'm not familiar with this command but did google it. Do you know where in my command it should go?Have you tried the run command with :noavx
I just found this and will try it now.I'm not familiar with this command but did google it. Do you know where in my command it should go?
It's working!! Awesome! Thanks so much eman! Thanks to ReXX as well!Tack it to the end of both the pull and the run command. The celeron cpu probably does not have avx
So I turned on the GPU version again and left for a night, the GPU version will process an image in ~0.7 seconds to 1.06 seconds. Unfortunately I get those squares, and ultimately it just stops working for no reason.@pbc Whenever I got the little boxes above v1/backup I had a problem with deepstack. Proabably did not load properly
Strangely the only way I get deepstack to work is if I use the :noavx parameter even though I have an i7 8700 cpu which has avx2
I stop deepstack with docker stop containerid then docker rm containerid and redo the run command