I have built a lot of ends - lotsa practice both due to mistakes and gremlins. I re-do frequently mainly because I have rodents that nibble on cat6. My runs are either thru the trees or along the ground in woods. I was pleased to learn here about dialectic grease and fancy tapes, but question the quality of the connections I have been buying.
The RJ45 ends can either be internal butt joints using the little guides or the thru-the connector where you trim surplus. If one is better - I should know ...and if there is a better brand I would like to know that also.
The other is the RJ45-to-RJ45 connector. These appear to be made for thru-a-cabinet installations. I have not found any that are both sealed and purely a joint. Perhaps there is a completely different way to join cable?
I'd appreciate any suggestion on quality products. Thanks.
Jim
The RJ45 ends can either be internal butt joints using the little guides or the thru-the connector where you trim surplus. If one is better - I should know ...and if there is a better brand I would like to know that also.
The other is the RJ45-to-RJ45 connector. These appear to be made for thru-a-cabinet installations. I have not found any that are both sealed and purely a joint. Perhaps there is a completely different way to join cable?
I'd appreciate any suggestion on quality products. Thanks.
Jim