Sloped eave mount for DS-2CD2332

H

happifella

n3wb
May 1, 2014
9
0
Hello everyone

New IP Camera enthusiast here and I have purchased a Hikvision DS-2CD2332. I have sloped eaves (with a lip) on my house so I am looking for a sloped mount for the 2332 such as this one: http://www.nellyssecurity.com/acces...-for-hikvision-2cd2132-i-3mp-dome-camera.html

attachment.php


Does anyone know if this mount will work with the DS-2CD2332 or if there is another one that would?

Thanks!
 

Attachments

  • ds-1259zj.png
    ds-1259zj.png
    24.5 KB · Views: 221
You shouldn't need it. The camera is three axis meaning you can mount it to anything and adjust it to be level. I've mounted these on several sloped eaves and there is no problem. These are my favorite cams to install!
 
Depending on how much of a slope your eaves are you will have a problem as you won't be able to angle the camera up enough, nearly made the mistake on an install recently, luckily spotted it before drilling and relocated.
 
You should contact @RyanODan from Nelly's on the forum here and see what he says about that mount.
 
Last edited by a moderator:
Here are some pictures of the soffit
 

Attachments

  • 20150821_114900_resized.jpg
    20150821_114900_resized.jpg
    953.9 KB · Views: 130
  • 20150821_114921_resized.jpg
    20150821_114921_resized.jpg
    628.1 KB · Views: 126
  • 20150821_114954_resized.jpg
    20150821_114954_resized.jpg
    600.8 KB · Views: 122
These are hard to find for the turret model. I have one on a turrret to help space it lower than the gutter because of it reflection.
Google Hikvision ABT-1

i have attached a pic of the turret attached to the ABT-1 mount
 

Attachments

  • image.jpg
    image.jpg
    176.3 KB · Views: 109
  • Like
Reactions: jordanb
klasipca said:
Since dome and turret is about the same size, it should work, worst case scenario might have to drill additional holes. Btw, cheaper at Ali http://www.aliexpress.com/item/Hikv...ing-mounting-Camera-s-Bracket/2046659273.html, but of course it comes with Chinese language manual and possibly will require a hack to fit eaves in the US roofs.
Click to expand...
It won't fit. They're not the same size. You need the ABT-1 bracket. Get from milkisbad if you are US as they aren't easy to source.
 
Thanks Bow94z. I found the specs on the Ltb349 yesterday and the diameter of the mount is smaller than the base of the 2332 so I don't think it will work. Looks like the ABT-1 is the one to use for sloped soffits.
 
You must log in or register to reply here.
Top Bottom