PS - in relation to the 8223 I don't suppose you have an Acusense NVR, but even without that, can you tell me if your camera can do the following:
1. Patrol various different areas on a schedule, regularly? (I always wonder if you can burn the motors out. I would like mine constantly ranging, not hanging around for too long in one spot)
2. Alert for movement ONLY in certain intrusion areas (boxes/lines), in different patrol areas?
What I don't know, as I have never used a PTZ before of any description, is whether you can only set an alert for a static area that the camera remains fixed on, or whether you can draw various lines/boxes in different places, maybe 500 yards apart, so WHEN the camera is panning to cover that area, it alerts, then the camera goes back to the other areas and alerts for motion in the instrusion zones in that other area.
I suspect it can't do it but maybe you can confirm?
Not sure if that makes any sense, to make it easier.....
Imagine that I have the camera on a pole in the middle of a field between two car parks, and I wanted to alert if motion was detected inside either of the car parks but not in between. Could you set up each car park as a zone for motion alerts, so when the camera is filming on car park 1, it alerts to motion, but after panning back to car park 2, it will also alert for motion there when it can see any.
IF this was possible, it could be very cool, as I can draw areas where our stalker often is seen (by a gatepost on the hill, stupidly thinking he is invisible

) and I could also draw some areas where the wild cat is often seen, and hopefully catch one of them whenever the camera is covering that area. Then I could set up patrol patterns to switch between those areas.