RTSP for Zero-channel, only showing 16 cameras on a 32 camera DVR (DS-7332HQHI-K4)?

[chickychickyboomboom]

I'm using this RTSP url: rtsp://192.168.1.211:554/Streaming/Channels/001

But it is only showing the first 16 cameras, I tried 002 to perhaps get a sub stream? But that's not working. Is it possible to get all 32 cameras on one stream?

Thanks!

DS-7332HQHI-K4

 

[chickychickyboomboom]

Bump?

 

[TonyR]

FWIW, from pages 6 & 7 "Local Monitoring" of the manual:

"....For DS-7324/7332/8124/8132HQHI-K and DS-7324/7332/8124/8132/9024/9032HUHI-K series DVR, up to 32-window division mode is supported for VGA/HDMI1 output, and up to 16-window division mode is supported for CVBS output. For the HDMI2 output, if the resolution is lower than 4K, up to 36-window division mode is supported; if the resolution is 4K, up to 64-window division mode is supported."

 

[chickychickyboomboom]

FWIW, from pages 6 & 7 "Local Monitoring" of the manual:

"....For DS-7324/7332/8124/8132HQHI-K and DS-7324/7332/8124/8132/9024/9032HUHI-K series DVR, up to 32-window division mode is supported for VGA/HDMI1 output, and up to 16-window division mode is supported for CVBS output. For the HDMI2 output, if the resolution is lower than 4K, up to 36-window division mode is supported; if the resolution is 4K, up to 64-window division mode is supported."

Thanks for the reply. So are you saying that Zero-Channel is using the same internal stream as the CVBS output?

 

[Securame]

The zero channel stream uses one of the outputs. If you want to be sure which one it is on your unit, just connect a monitor/TV/whatever to each output on the unit, a USB mouse, and play with what you are seeing on the outputs until you find out which one is the zero channel using.