crankycowboy
n3wb
- Joined
- Aug 18, 2017
- Messages
- 22
- Reaction score
- 6
Hi, I've been running BI for several years with only few issues. Recently, I was curious about how to verify quicksync was working. Everything I have read where you can verify it's working indicate that maybe it isn't; however, I can't find any reason why it wouldn't be. I have a 12th Gen i5 12600k with onboard graphics. In task manager, there is no "gpu" listing for blue iris. In blue iris stats, there is no "#" under megapixels listed. For 13 cameras, my CPU is only 1-2% and GPU is 1-2% and ram is less than 2 GB. all set to continuous recording...so the load on my system isn't an issue, I'd just really like to utilize QS if I can. In the BI settings I have it set to intel, and under all cameras I have "hardware decode" set to "default" on all cameras except for one that I can't run h264 on. I've attached several pictures to verify my current settings etc. Please advise.
Attachments
-
17.7 KB Views: 8
-
116.8 KB Views: 9
-
45.8 KB Views: 10
-
2.5 KB Views: 8