I have several outside cameras that are stationary. I have one that is a PTZ camera. I have each camera programmed to send a command to the PTZ camera when they are triggered. When a trigger occurs, the PTZ will change presets and look in the general area of the activated camera. I can run a test under the "On Alert" tab for each camera and the PTZ responds as it should. However, when I go to camera settings in the camera itself and click "Trigger Now", the PTZ does not respond. I do have two out of nine cameras that do work correctly when the trigger now button is activated. I have checked and doubled checked the setting with the cameras that are working correctly and I don's see any discrepancies in the settings. Cant figure out what I am over looking.