So.. recently built a house.. pre-wired to the locations I thought I'd want cameras. Turns out I got one wrong.. I pre-wired to the left of my front door on a covered porch; now that it's all built out, the foot traffic comes from the left, so the cam needs to be on the right.
The spool I left is not long enough to go from left to right.. while not impossible, it would not be easy to re-pull wire to that location.. was thinking of terminating the original pull with a jack, and then a 6 foot ish patch cable to the camera. It's on a covered porch, and will be "protected" further being behind (above?) the soffit.
Anyone see any holes in this plan? It's going to be a Hikvision DS-2CD2135F Dome POE setup.
The spool I left is not long enough to go from left to right.. while not impossible, it would not be easy to re-pull wire to that location.. was thinking of terminating the original pull with a jack, and then a 6 foot ish patch cable to the camera. It's on a covered porch, and will be "protected" further being behind (above?) the soffit.
Anyone see any holes in this plan? It's going to be a Hikvision DS-2CD2135F Dome POE setup.