VCA Target Highlight does not exist on playback or live view
Minimum (5 seconds) or maximum possible pre-record (30 seconds) on camera do not work. Auto Event playback starts 5 to 10 seconds after the target is gone on any resolution or bit rate for DS-2CD2047G2-L ColorVu. No option to manually move playback cursor during this above Auto event playback problem. At least there should be an option since the pre-record problem is well known to Hikvision.
Smart Event-> Intrusion Event area previously set on 2CD2047G2-L ColorVu, is missing in settings of same camera through DS-7608NXI-K2 although VCA mode is set By Camera
Altering and saving event settings through DS-7608NXI-K2 NVR sometimes resets all area settings to default for all cameras by disappearing or filling alarm areas
There is no option for Events to send an Audio Alarm sound through HDMI on a speaker monitor or TV. There is only a Buzzer Alarm and a Notify Surveillance Center Alarm
Event alarm causes a loss for about 5 recorded seconds(skipping frames) on older DS-KV6113WPE1 and some times on 2CD2047G2-L ColorVu
