NVR DS-7108NI-E1-V-W KEEP Rebooting

[algtest]

hELLO

I am new here and i Baught NVR DS-7108NI-E1-V-W CHINISE version
i tried to upgrade the firmware after change language to english now the NVR Rebooting all time .less than one minutes restart

Is there any way to fix it ?

Thanks

 

[alastairstevenson]

If it's doing maybe 10 or more beeps then rebooting, it probably complaining that you have loaded overseas or EN firmware on a CN NVR. The firmware does not allow the use of non-CN firmware on CN NVRs.
You can find the CN firmware here, 6th one down: http://www1.hikvision.com/cn/download_more_699.html#prettyPhoto

 

[algtest]

When i tried that firmware i got below messages


016-03-11 18:43:15] Start file[C:\hik\NEW\digicap.dav] transmitting


[2016-03-11 18:43:43] Completed file[C:\hik\NEW\digicap.dav] transmit


[2016-03-11 18:43:45] Connect client[192.0.0.64] success


[2016-03-11 18:43:45] Open file[C:\hik\NEW\router.img] failure


[2016-03-11 18:43:45] Connect client[192.0.0.64] success


[2016-03-11 18:43:45] Open file[C:\hik\NEW\router.img] failure


[2016-03-11 18:43:45] Connect client[192.0.0.64] success


[2016-03-11 18:43:45] Open file[C:\hik\NEW\router.img] failure


[2016-03-11 18:43:45] Connect client[192.0.0.64] success


[2016-03-11 18:43:45] Open file[C:\hik\NEW\router.img] failure


[2016-03-11 18:43:45] Connect client[192.0.0.64] success


[2016-03-11 18:43:45] Open file[C:\hik\NEW\router.img] failure

 

[supe]

@algtest
I know this is an old post but did you or anyone ever get that router.img file? it seems like the tftp method for the wifi NVER's needs both the digicap.dav and the router.img file.

I'm looking for the router.img file for firmware 3.4.80 which I believe is the latest for the DS-7108NI-E1/V/W

Thanks