NVR DS-7108N-SN/P

[RX78]

Hello everyone

I'm working on building a new set of PoE camera system, I have DS-2CD2145FWD x 3 , and also have the DS-7108N-SN/P.

I can use the application iVMS-4200 to connect each camera without any issue. but the NVR doesn't seem to recongnize any of those cameras.

what did I do wrong, please advice

thanks

addtional info (not sure does it matter) I have all three cameras purchase US version, but the NVR is purchase off from ebay, and the seller status the NVR has firmware can accept any cameras.

 

[alastairstevenson]

and also have the DS-7108N-SN/P.

That mini NVR has some performance limitations - will only take camera feeds at 1080p or under.
It's not a good match for 4MP cameras.
Check the camera web GUI for video settings and if needed drop resolution down to 1080p and see it connects.

 

[RX78]

Check the camera web GUI for video settings and if needed drop resolution down to 1080p and see it connects.

thank you ver much, the NVR is up and running right now , I apperciate the tip