No motion recording BI V4

GeometricAtom

GeometricAtom

n3wb
Nov 12, 2014
24
1
Currently running the latest Blue Iris version 4.0.0.16 on my setup. However, this version doesn't record motion on one of my camera (IPQ 2232x), but works fine on my Hikvision and Tenvis cameras. Blue Iris does save a picture when motion is detected (under alerts), but doesn't save a Blue Iris DVR. Hence, I tried using version 3 on another computer with the same "motion/tigger" and "record" settings, and it can pick up and record footage.
 
Double check your settings...post a screen shot of your motion and record settings..
 
Is this occuring while profile 1 is active? Try deleting the camera and setting it up again. Also you should try using brightness and color not just brightness for motion detection, however that does not seem to be causing your issue because you are generating an alert image.
 
I enabled profile one by clicking it during live view and changed the setting to "colour and brightness", but it still doesn't record any footage, just alerts. Maybe it has something to do with v4?
 
Have you tried simply deleting the camera and setting up a new one...these odd problems have been resolved that way in the past.
 
  • Like
Reactions: GeometricAtom
fenderman said:
Have you tried simply deleting the camera and setting up a new one...these odd problems have been resolved that way in the past.
Click to expand...

Thanks agian! Deleting it and setting up again fixed the problem. However, I haven't set that camera up properly, thus I am not sure if I will encounter the same problem again.
 
FactOrFiction said:
Thanks agian! Deleting it and setting up again fixed the problem. However, I haven't set that camera up properly, thus I am not sure if I will encounter the same problem again.
Click to expand...
You should be fine......it was detecting motion as the alert image was generated...so it was a glitch..
 
fenderman said:
You should be fine......it was detecting motion as the alert image was generated...so it was a glitch..
Click to expand...

Worked for a little while. I had to delete that camera and start again. This time instead of motion, I used continuous and it doesn't record the footage anymore. The format I used is direct to disc.


EDIT: Under Motion/Trigger I am able to click "trigger now" manually, and it does record the footage.
 
Last edited by a moderator:
fenderman said:
You should be fine......it was detecting motion as the alert image was generated...so it was a glitch..
Click to expand...

After trial and error, I realised that this particular camera doesn't record with the file compression "direct to disc", and I have to use the h264 setting
 
You must log in or register to reply here.
Top Bottom