Night vision nvr

[Jramosent]

Hey everyone, I have an issue as to I cannot find the setting to switch night vision on or off. I have three cameras connected to my 7600 hikvision nvr and I connect remotely using the ip address. Before I had the nvr the cams were connected to a switch and I was able to access them individually and adjust night vision on or off no problem. With the nvr I'm lose.

Any help

 

[Securame]

Activate "virtual host" so you can also access the cameras GUI through the web interface. That is the only way to access all the funcions on a camera that is directly connected on the NVR POE ports.

 

[Jramosent]

Activate "virtual host" so you can also access the cameras GUI through the web interface. That is the only way to access all the funcions on a camera that is directly connected on the NVR POE ports.

Thank you very much. I would have never have figuered it out